From 1b03fa0b512c5256ac70412275a4056f782f7abf Mon Sep 17 00:00:00 2001
From: mono-b <monoblanco@DRAINERDOMAIN.localdomain>
Date: Thu, 5 Jan 2023 19:14:29 -0300
Subject: removed polybar trash

---
 polybar/cuts/modules.ini | 1031 ----------------------------------------------
 1 file changed, 1031 deletions(-)

(limited to 'polybar/cuts/modules.ini')

diff --git a/polybar/cuts/modules.ini b/polybar/cuts/modules.ini
index 58ad006..197c4ca 100644
--- a/polybar/cuts/modules.ini
+++ b/polybar/cuts/modules.ini
@@ -1,731 +1,38 @@
-;; ┌────────────────────────────────────────────────────────────────┐
-;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│
-;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│
-;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│
-;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
-;; └────────────────────────────────────────────────────────────────┘
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/alsa]
-type = internal/alsa
-
-; Soundcard to be used
-; Usually in the format hw:# where # is the card number
-; You can find the different card numbers in `/proc/asound/cards`
-master-soundcard = default
-speaker-soundcard = default
-headphone-soundcard = default
-
-; Name of the master, speaker and headphone mixers
-; Use the following command to list available mixer controls:
-; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
-; If master, speaker or headphone-soundcard isn't the default, 
-; use `amixer -c # scontrols` instead where # is the number 
-; of the master, speaker or headphone soundcard respectively
-;
-; Default: Master
-master-mixer = Master
-
-; Optionally define speaker and headphone mixers
-; Default: none
-;;speaker-mixer = Speaker
-; Default: none
-;;headphone-mixer = Headphone
-
-; NOTE: This is required if headphone_mixer is defined
-; Use the following command to list available device controls
-; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
-; You may also need to use `amixer -c # controls` as above for the mixer names
-; Default: none
-;;headphone-id = 9
-
-; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
-; Default: false
-;;mapped = true
-
-; Interval for volume increase/decrease (in percent points)
-; Default: 5
-interval = 5
-
-; Available tags:
-;   <label-volume> (default)
-;   <ramp-volume>
-;   <bar-volume>
-format-volume = <ramp-volume> <label-volume>
-format-volume-background = ${color.background}
-format-volume-padding = 1
-
-; Available tags:
-;   <label-muted> (default)
-;   <ramp-volume>
-;   <bar-volume>
-format-muted = <label-muted>
-format-muted-prefix = 
-format-muted-background = ${color.background}
-format-muted-padding = 1
-
-; Available tokens:
-;   %percentage% (default)
-label-volume = %percentage%%
-
-; Available tokens:
-;   %percentage% (default
-label-muted = " Muted"
-label-muted-foreground = ${color.foreground}
-
-; Only applies if <ramp-volume> is used
-ramp-volume-0 = 
-ramp-volume-1 = 
-ramp-volume-2 = 
-
-; If defined, it will replace <ramp-volume> when
-; headphones are plugged in to `headphone_control_numid`
-; If undefined, <ramp-volume> will be used for both
-; Only applies if <ramp-volume> is used
-ramp-headphones-0 = 
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/backlight]
-;type = internal/xbacklight
-type = internal/backlight
-
-; Use the following command to list available cards:
-; $ ls -1 /sys/class/backlight/
-;card = intel_backlight
-card = amdgpu_bl0
-
-; Available tags:
-;   <label> (default)
-;   <ramp>
-;   <bar>
-format = <ramp> <label>
-format-background = ${color.background}
-format-padding = 1
-
-; Available tokens:
-;   %percentage% (default)
-label = %percentage%%
-
-; Only applies if <ramp> is used
-ramp-0 = 
-ramp-1 = 
-ramp-2 = 
-ramp-3 = 
-ramp-4 = 
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/battery]
-type = internal/battery
-
-; This is useful in case the battery never reports 100% charge
-full-at = 99
-
-; Use the following command to list batteries and adapters:
-; $ ls -1 /sys/class/power_supply/
-battery = BAT1
-adapter = ACAD
-
-; If an inotify event haven't been reported in this many
-; seconds, manually poll for new values.
-;
-; Needed as a fallback for systems that don't report events
-; on sysfs/procfs.
-;
-; Disable polling by setting the interval to 0.
-;
-; Default: 5
-poll-interval = 2
-
-; see "man date" for details on how to format the time string
-; NOTE: if you want to use syntax tags here you need to use %%{...}
-; Default: %H:%M:%S
-time-format = %H:%M
-
-; Available tags:
-;   <label-charging> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-;   <animation-charging>
-format-charging = <label-charging>
-format-charging-prefix = " "
-format-charging-background = ${color.background}
-format-charging-padding = 1
-
-; Available tags:
-;   <label-discharging> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-;   <animation-discharging>
-format-discharging = <label-discharging>
-format-discharging-prefix = " "
-format-discharging-background = ${color.background}
-format-discharging-padding = 1
-
-; Available tags:
-;   <label-full> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-format-full = <label-full>
-format-full-prefix = " "
-format-full-background = ${color.background}
-format-full-padding = 1
-
-; Available tokens:
-;   %percentage% (default)
-;   %time%
-;   %consumption% (shows current charge rate in watts)
-label-charging = %percentage%%
-
-; Available tokens:
-;   %percentage% (default)
-;   %time%
-;   %consumption% (shows current discharge rate in watts)
-label-discharging = %percentage%%
-
-; Available tokens:
-;   %percentage% (default)
-label-full = Full
-
-; Only applies if <ramp-capacity> is used
-ramp-capacity-0 = 
-ramp-capacity-1 = 
-ramp-capacity-2 = 
-ramp-capacity-3 = 
-ramp-capacity-4 = 
-
-; Only applies if <bar-capacity> is used
-;bar-capacity-width = 10
-
-; Only applies if <animation-charging> is used
-animation-charging-0 = 
-animation-charging-1 = 
-
-; Framerate in milliseconds
-animation-charging-framerate = 750
-
-; Only applies if <animation-discharging> is used
-;;animation-discharging-0 = ${battery.anim0}
-;;animation-discharging-1 = ${battery.anim1}
-
-; Framerate in milliseconds
-;animation-discharging-framerate = 500
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;;[module/bspwm]
-;;type = internal/bspwm
-
-; Only show workspaces defined on the same output as the bar
-; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
-; Default: true
-;;pin-workspaces = true
-
-; Output mode flags after focused state label
-; Default: false
-;;inline-mode = false
-
-; Create click handler used to focus workspace
-; Default: true
-;;enable-click = false
-
-; Create scroll handlers used to cycle workspaces
-; Default: true
-;;enable-scroll = false
-
-; Set the scroll cycle direction 
-; Default: true
-;;reverse-scroll = false
-
-; Use fuzzy (partial) matching on labels when assigning 
-; icons to workspaces
-; Example: code;♚ will apply the icon to all workspaces 
-; containing 'code' in the label
-; Default: false
-;;fuzzy-match = true
-
-; ws-icon-[0-9]+ = label;icon
-; Note that the label needs to correspond with the bspwm workspace name
-;;ws-icon-0 = code;♚
-;;ws-icon-1 = office;♛
-;;ws-icon-2 = graphics;♜
-;;ws-icon-3 = mail;♝
-;;ws-icon-4 = web;♞
-;;ws-icon-default = ♟
-
-; Available tags:
-;   <label-monitor>
-;   <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)>
-;   <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)>
-; Default: <label-state>
-;;format = <label-state> <label-mode>
-
-; Available tokens:
-;   %name%
-; Default: %name%
-;;label-monitor = %name%
-
-; If any values for label-dimmed-N are defined, the workspace/mode
-; colors will get overridden with those values if the monitor is out of focus
-; To only override workspaces in a specific state, use:
-;   label-dimmed-focused
-;   label-dimmed-occupied
-;   label-dimmed-urgent
-;   label-dimmed-empty
-;;label-dimmed-foreground = #555
-;;label-dimmed-underline = ${bar/top.background}
-;;label-dimmed-focused-background = #f00
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-; Default: %icon%  %name%
-;;label-focused = %icon%
-;;label-focused-foreground = #ffffff
-;;label-focused-background = #3f3f3f
-;;label-focused-underline = #fba922
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-; Default: %icon%  %name%
-;;label-occupied = %icon%
-;;label-occupied-underline = #555555
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-; Default: %icon%  %name%
-;;label-urgent = %icon%
-;;label-urgent-foreground = #000000
-;;label-urgent-background = #bd2c40
-;;label-urgent-underline = #9b0a20
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-; Default: %icon%  %name%
-;;label-empty = %icon%
-;;label-empty-foreground = #55
-
-; The following labels will be used to indicate the layout/mode
-; for the focused workspace. Requires <label-mode>
-;
-; Available tokens:
-;   None
-;label-monocle = 
-;label-tiled = 
-;label-fullscreen = 
-;label-floating = 
-;label-pseudotiled = P
-;label-locked = 
-;label-locked-foreground = #bd2c40
-;label-sticky = 
-;label-sticky-foreground = #fba922
-;label-private = 
-;label-private-foreground = #bd2c40
-
-; Separator in between workspaces
-;;label-separator = |
-;;label-separator-padding = 2
-;;label-separator-foreground = #ffb52a
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/cpu]
-type = internal/cpu
-
-; Seconds to sleep between updates
-; Default: 1
-interval = 1
-
-; Available tags:
-;   <label> (default)
-;   <bar-load>
-;   <ramp-load>
-;   <ramp-coreload>
-;;format = <label> <ramp-coreload>
-format = <label>
-format-prefix = 
-format-background = ${color.background}
-format-padding = 1
-
-; Available tokens:
-;   %percentage% (default) - total cpu load averaged over all cores
-;   %percentage-sum% - Cumulative load on all cores
-;   %percentage-cores% - load percentage for each core
-;   %percentage-core[1-9]% - load percentage for specific core
-label = " %percentage%%"
-
-; Spacing between individual per-core ramps
-;;ramp-coreload-spacing = 1
-;;ramp-coreload-0 = ${cpu.load0}
-;;ramp-coreload-1 = ${cpu.load1}
-
-;;ramp-load-0 = ${cpu.load0}
-;;ramp-load-1 = ${cpu.load1}
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
 [module/date]
 type = internal/date
-
-; Seconds to sleep between updates
 interval = 1.0
-
-; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
-; NOTE: if you want to use syntax tags here you need to use %%{...}
-;;date = %Y-%m-%d%
-
-; Optional time format
 time = " %I:%M %p"
-
-; if `date-alt` or `time-alt` is defined, clicking
-; the module will toggle between formats
-;;date-alt = %A, %d %B %Y
 time-alt = " %a, %d %b %Y"
-
-; Available tags:
-;   <label> (default)
 format = <label>
 format-background = ${color.background}
 format-padding = 1
-
-; Available tokens:
-;   %date%
-;   %time%
-; Default: %date%
 label = %time%
 
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/filesystem]
-type = internal/fs
-
-; Mountpoints to display
-mount-0 = /
-;;mount-1 = /home
-;;mount-2 = /var
-
-; Seconds to sleep between updates
-; Default: 30
-interval = 30
-
-; Display fixed precision values
-; Default: false
-fixed-values = true
-
-; Spacing between entries
-; Default: 2
-;;spacing = 4
-
-; Available tags:
-;   <label-mounted> (default)
-;   <bar-free>
-;   <bar-used>
-;   <ramp-capacity>
-format-mounted = <label-mounted>
-format-mounted-prefix = 
-format-mounted-background = ${color.background}
-format-mounted-padding = 1
-
-; Available tags:
-;   <label-unmounted> (default)
-format-unmounted = <label-unmounted>
-format-unmounted-prefix = 
-format-unmounted-background = ${color.background}
-format-unmounted-padding = 1
-
-; Available tokens:
-;   %mountpoint%
-;   %type%
-;   %fsname%
-;   %percentage_free%
-;   %percentage_used%
-;   %total%
-;   %free%
-;   %used%
-; Default: %mountpoint% %percentage_free%%
-label-mounted = " %free%"
-
-; Available tokens:
-;   %mountpoint%
-; Default: %mountpoint% is not mounted
-label-unmounted = " %mountpoint%: not mounted"
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;;[module/github]
-;;type = internal/github
-
-; Accessing an access token stored in file
-;;token = ${file:/path/to/file/containing/github/access.token}
-
-; Accessing an access token stored in an environment variable
-;;token = ${env:GITHUB_ACCESS_TOKEN}
-
-; Whether empty notifications should be displayed or not
-;;empty-notifications = false
-
-; Number of seconds in between requests
-;;interval = 10
-
-; Available tags:
-;   <label> (default)
-;;format = <label>
-;;format-prefix = 
-
-; Available tokens:
-;   %notifications% (default)
-; Default: Notifications: %notifications%
-;;label = %notifications%
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;;[module/i3]
-;;type = internal/i3
-
-; Only show workspaces defined on the same output as the bar
-;
-; Useful if you want to show monitor specific workspaces
-; on different bars
-;
-; Default: false
-;;pin-workspaces = true
-
-; This will split the workspace name on ':'
-; Default: false
-;;strip-wsnumbers = true
-
-; Sort the workspaces by index instead of the default
-; sorting that groups the workspaces by output
-; Default: false
-;;index-sort = true
-
-; Create click handler used to focus workspace
-; Default: true
-;;enable-click = false
-
-; Create scroll handlers used to cycle workspaces
-; Default: true
-;;enable-scroll = false
-
-; Wrap around when reaching the first/last workspace
-; Default: true
-;;wrapping-scroll = false
-
-; Set the scroll cycle direction 
-; Default: true
-;;reverse-scroll = false
-
-; Use fuzzy (partial) matching on labels when assigning 
-; icons to workspaces
-; Example: code;♚ will apply the icon to all workspaces 
-; containing 'code' in the label
-; Default: false
-;;fuzzy-match = true
-
-; ws-icon-[0-9]+ = label;icon
-; NOTE: The label needs to match the name of the i3 workspace
-;;ws-icon-0 = 1;♚
-;;ws-icon-1 = 2;♛
-;;ws-icon-2 = 3;♜
-;;ws-icon-3 = 4;♝
-;;ws-icon-4 = 5;♞
-;;ws-icon-default = ♟
-; NOTE: You cannot skip icons, e.g. to get a ws-icon-6
-; you must also define a ws-icon-5.
-
-; Available tags:
-;   <label-state> (default) - gets replaced with <label-(focused|unfocused|visible|urgent)>
-;   <label-mode> (default)
-;;format = <label-state> <label-mode>
-
-; Available tokens:
-;   %mode%
-; Default: %mode%
-;;label-mode = %mode%
-;;label-mode-padding = 2
-;;label-mode-background = #e60053
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-;   %output%
-; Default: %icon%  %name%
-;;label-focused = %index%
-;;label-focused-foreground = #ffffff
-;;label-focused-background = #3f3f3f
-;;label-focused-underline = #fba922
-;;label-focused-padding = 4
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-;   %output%
-; Default: %icon%  %name%
-;;label-unfocused = %index%
-;;label-unfocused-padding = 4
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-;   %output%
-; Default: %icon%  %name%
-;;label-visible = %index%
-;;label-visible-underline = #555555
-;;label-visible-padding = 4
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-;   %output%
-; Default: %icon%  %name%
-;;label-urgent = %index%
-;;label-urgent-foreground = #000000
-;;label-urgent-background = #bd2c40
-;;label-urgent-padding = 4
-
-; Separator in between workspaces
-;;label-separator = |
-;;label-separator-padding = 2
-;;label-separator-foreground = #ffb52a
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
 [module/memory]
 type = internal/memory
-
-; Seconds to sleep between updates
-; Default: 1
 interval = 1
-
-; Available tags:
-;   <label> (default)
-;   <bar-used>
-;   <bar-free>
-;   <ramp-used>
-;   <ramp-free>
-;   <bar-swap-used>
-;   <bar-swap-free>
-;   <ramp-swap-used>
-;   <ramp-swap-free>
 format = <label>
 format-prefix = 
 format-background = ${color.background}
 format-padding = 1
-
-; Available tokens:
-;   %percentage_used% (default)
-;   %percentage_free%
-;   %gb_used%
-;   %gb_free%
-;   %gb_total%
-;   %mb_used%
-;   %mb_free%
-;   %mb_total%
-;   %percentage_swap_used%
-;   %percentage_swap_free%
-;   %mb_swap_total%
-;   %mb_swap_free%
-;   %mb_swap_used%
-;   %gb_swap_total%
-;   %gb_swap_free%
-;   %gb_swap_used%
-
 label = " %mb_used%"
 
-; Only applies if <ramp-used> is used
-;;ramp-used-0 = ${memory.used0}
-;;ramp-used-1 = ${memory.used1}
-;;ramp-used-2 = ${memory.used2}
-
-; Only applies if <ramp-free> is used
-;;ramp-free-0 = ${memory.free0}
-;;ramp-free-1 = ${memory.free1}
-;;ramp-free-2 = ${memory.free2}
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
 [module/mpd]
 type = internal/mpd
-
-; Host where mpd is running (either ip or domain name)
-; Can also be the full path to a unix socket where mpd is running.
-;;host = 127.0.0.1
-;;port = 6600
-;;password = mysecretpassword
-
-; Seconds to sleep between progressbar/song timer sync
-; Default: 1
 interval = 1
-
-; Available tags:
-;   <label-song> (default)
-;   <label-time>
-;   <bar-progress>
-;   <toggle> - gets replaced with <icon-(pause|play)>
-;   <toggle-stop> - gets replaced with <icon-(stop|play)>
-;   <icon-random>
-;   <icon-repeat>
-;   <icon-repeatone> (deprecated)
-;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
-;   <icon-consume>
-;   <icon-prev>
-;   <icon-stop>
-;   <icon-play>
-;   <icon-pause>
-;   <icon-next>
-;   <icon-seekb>
-;   <icon-seekf>
 format-online = <label-song> <icon-prev> <toggle> <icon-next>
 format-online-prefix = 
 format-online-background = ${color.background}
 format-online-padding = 1
-
-;format-playing = ${self.format-online}
-;format-paused = ${self.format-online}
-;format-stopped = ${self.format-online}
-
-; Available tags:
-;   <label-offline>
 format-offline = <label-offline>
 format-offline-prefix = 
 format-offline-background = ${color.background}
 format-offline-padding = 1
-
-; Available tokens:
-;   %artist%
-;   %album-artist%
-;   %album%
-;   %date%
-;   %title%
-; Default: %artist% - %title%
 label-song =  " %artist% - %title%"
 label-song-maxlen = 25
 label-song-ellipsis = true
-
-; Available tokens:
-;   %elapsed%
-;   %total%
-; Default: %elapsed% / %total%
 label-time = %elapsed% / %total%
-
-; Available tokens:
-;   None
 label-offline = " Offline"
-
-; Only applies if <icon-X> is used
 icon-play = 
 icon-pause = 
 icon-stop = 
@@ -738,371 +45,33 @@ icon-repeat =
 icon-repeatone = 
 icon-single = 
 icon-consume =
-
-; Used to display the state of random/repeat/repeatone/single
-; Only applies if <icon-[random|repeat|repeatone|single]> is used
 toggle-on-foreground = ${color.green}
 toggle-off-foreground = ${color.red}
 
-; Only applies if <bar-progress> is used
-;;bar-progress-width = 45
-;;bar-progress-indicator = |
-;;bar-progress-fill = ─
-;;bar-progress-empty = ─
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-; If you use both a wired and a wireless network, just add 2 module definitions. For example
-[module/wired-network]
-type = internal/network
-interface = eth0
-
-[module/wireless-network]
-type = internal/network
-interface = wlp3s0
-
-; Normal Module
-[module/network]
-type = internal/network
-interface = wlan0
-
-; Seconds to sleep between updates
-; Default: 1
-interval = 1.0
-
-; Test connectivity every Nth update
-; A value of 0 disables the feature
-; NOTE: Experimental (needs more testing)
-; Default: 0
-;ping-interval = 3
-
-; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
-; Minimum output width of upload/download rate
-; Default: 3
-;;udspeed-minwidth = 5
-
-; Accumulate values from all interfaces
-; when querying for up/downspeed rate
-; Default: false
-accumulate-stats = true
-
-; Consider an `UNKNOWN` interface state as up.
-; Some devices have an unknown state, even when they're running
-; Default: false
-unknown-as-up = true
-
-; Available tags:
-;   <label-connected> (default)
-;   <ramp-signal>
-format-connected = <label-connected>
-format-connected-prefix = 
-format-connected-background = ${color.background}
-format-connected-padding = 1
-
-; Available tags:
-;   <label-disconnected> (default)
-format-disconnected = <label-disconnected>
-format-disconnected-prefix = 
-format-disconnected-background = ${color.background}
-format-disconnected-padding = 1
-
-; Available tags:
-;   <label-connected> (default)
-;   <label-packetloss>
-;   <animation-packetloss>
-;;format-packetloss = <animation-packetloss> <label-connected>
-
-; Available tokens:
-;   %ifname%    [wireless+wired]
-;   %local_ip%  [wireless+wired]
-;   %local_ip6% [wireless+wired]
-;   %essid%     [wireless]
-;   %signal%    [wireless]
-;   %upspeed%   [wireless+wired]
-;   %downspeed% [wireless+wired]
-;   %linkspeed% [wired]
-; Default: %ifname% %local_ip%
-label-connected = "%{A1:networkmanager_dmenu &:} %essid%  %downspeed%  %upspeed%%{A}"
-
-; Available tokens:
-;   %ifname%    [wireless+wired]
-; Default: (none)
-label-disconnected = "%{A1:networkmanager_dmenu &:} Offline%{A}"
-;;label-disconnected-foreground = #66ffffff
-
-; Available tokens:
-;   %ifname%    [wireless+wired]
-;   %local_ip%  [wireless+wired]
-;   %local_ip6% [wireless+wired]
-;   %essid%     [wireless]
-;   %signal%    [wireless]
-;   %upspeed%   [wireless+wired]
-;   %downspeed% [wireless+wired]
-;   %linkspeed% [wired]
-; Default: (none)
-;label-packetloss = %essid%
-;label-packetloss-foreground = #eefafafa
-
-; Only applies if <ramp-signal> is used
-ramp-signal-0 = 
-ramp-signal-1 = 
-ramp-signal-2 = 
-
-; Only applies if <animation-packetloss> is used
-;;animation-packetloss-0 = ⚠
-;;animation-packetloss-0-foreground = #ffa64c
-;;animation-packetloss-1 = ⚠
-;;animation-packetloss-1-foreground = #000000
-; Framerate in milliseconds
-;;animation-packetloss-framerate = 500
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/pulseaudio]
-type = internal/pulseaudio
-
-; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
-; If not, uses default sink
-sink = alsa_output.pci-0000_03_00.6.analog-stereo
-
-; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
-; Default: true
-use-ui-max = false
-
-; Interval for volume increase/decrease (in percent points)
-; Default: 5
-interval = 5
-
-; Available tags:
-;   <label-volume> (default)
-;   <ramp-volume>
-;   <bar-volume>
-format-volume = <ramp-volume> <label-volume>
-format-volume-background = ${color.background}
-format-volume-padding = 1
-
-; Available tags:
-;   <label-muted> (default)
-;   <ramp-volume>
-;   <bar-volume>
-format-muted = <label-muted>
-format-muted-prefix = 
-format-muted-background = ${color.background}
-format-muted-padding = 1
-
-; Available tokens:
-;   %percentage% (default)
-label-volume = %percentage%%
-
-; Available tokens:
-;   %percentage% (default
-label-muted = " Muted"
-label-muted-foreground = ${color.foreground}
-
-; Only applies if <ramp-volume> is used
-ramp-volume-0 = 
-ramp-volume-1 = 
-ramp-volume-2 = 
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/temperature]
-type = internal/temperature
-
-; Seconds to sleep between updates
-; Default: 1
-interval = 0.5
-
-; Thermal zone to use
-; To list all the zone types, run 
-; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
-; Default: 0
-thermal-zone = 0
-
-; Full path of temperature sysfs path
-; Use `sensors` to find preferred temperature source, then run
-; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
-; to find path to desired file
-; Default reverts to thermal zone setting
-;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
-hwmon-path = /sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/hwmon/hwmon0/temp1_input
-
-; Threshold temperature to display warning label (in degrees celsius)
-; Default: 80
-warn-temperature = 65
-
-; Whether or not to show units next to the temperature tokens (°C, °F)
-; Default: true
-units = true
-
-; Available tags:
-;   <label> (default)
-;   <ramp>
-format = <ramp> <label>
-format-background = ${color.background}
-format-padding = 1
-
-; Available tags:
-;   <label-warn> (default)
-;   <ramp>
-format-warn = <ramp> <label-warn>
-format-warn-background = ${color.background}
-format-warn-padding = 1
-
-; Available tokens:
-;   %temperature% (deprecated)
-;   %temperature-c%   (default, temperature in °C)
-;   %temperature-f%   (temperature in °F)
-label = %temperature-c%
-
-; Available tokens:
-;   %temperature% (deprecated)
-;   %temperature-c%   (default, temperature in °C)
-;   %temperature-f%   (temperature in °F)
-label-warn = "%temperature-c%"
-label-warn-foreground = ${color.red}
-
-; Requires the <ramp> tag
-; The icon selection will range from 0 to `warn-temperature`
-; with the current temperature as index.
-ramp-0 = 
-ramp-1 = 
-ramp-2 = 
-ramp-3 = 
-ramp-4 = 
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/keyboard]
-type = internal/xkeyboard
-
-; List of indicators to ignore
-blacklist-0 = num lock
-blacklist-1 = scroll lock
-
-; Available tags:
-;   <label-layout> (default)
-;   <label-indicator> (default)
-format = <label-layout> <label-indicator>
-format-background = ${color.background}
-format-padding = 1
-format-prefix = 
-
-; Available tokens:
-;   %layout%
-;   %name%
-;   %number%
-; Default: %layout%
-label-layout = " %layout%"
-
-; Available tokens:
-;   %name%
-; Default: %name%
-label-indicator-on = %name%
-label-indicator-on-foreground = ${color.primary}
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/title]
-type = internal/xwindow
-
-; Available tags:
-;   <label> (default)
-format = <label>
-format-background = ${color.background}
-format-padding = 0
-;format-prefix = 
-
-; Available tokens:
-;   %title%
-; Default: %title%
-label = "%title%"
-label-maxlen = 30
-
-; Used instead of label when there is no window title
-;;label-empty = Arch Linux
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
 [module/workspaces]
 type = internal/xworkspaces
-
-; Only show workspaces defined on the same output as the bar
-;
-; Useful if you want to show monitor specific workspaces
-; on different bars
-;
-; Default: false
 pin-workspaces = true
-
-; Create click handler used to focus desktop
-; Default: true
 enable-click = true
-
-; Create scroll handlers used to cycle desktops
-; Default: true
 enable-scroll = true
-
-; icon-[0-9]+ = <desktop-name>;<icon>
-; NOTE: The desktop name needs to match the name configured by the WM
-; You can get a list of the defined desktops using:
-; $ xprop -root _NET_DESKTOP_NAMES
 icon-0 = 1;I
 icon-1 = 2;II
 icon-2 = 3;III
 icon-3 = 4;IV
 icon-4 = 5;V
 icon-default = VI 
-
-
-; Available tags:
-;   <label-monitor>
-;   <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
-; Default: <label-state>
 format = <label-state>
 format-background = ${color.background}
 format-padding = 0
-
-; Available tokens:
-;   %name%
-; Default: %name%
 label-monitor = %name%
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-; Default: %icon%  %name%
 label-active = %icon%
 label-active-foreground = ${color.red}
 label-active-overline = ${color.red}
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-; Default: %icon%  %name%
 label-occupied = %icon%
 label-occupied-foreground = ${color.yellow}
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-; Default: %icon%  %name%
 label-urgent = %icon%
 label-urgent-foreground = ${color.green}
-
-; Available tokens:
-;   %name%
-;   %icon%
-;   %index%
-; Default: %icon%  %name%
 label-empty = %icon%
-
 label-active-padding = 1
 label-urgent-padding = 1
 label-occupied-padding = 1
 label-empty-padding = 1
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-- 
cgit v1.2.1