From 8dc8f2d52338fd87e7763995e6732f5a295300e8 Mon Sep 17 00:00:00 2001
From: mono-b <monoblanco@DRAINERDOMAIN.localdomain>
Date: Mon, 26 Dec 2022 04:08:53 -0300
Subject: huh

---
 polybar/cuts/modules.ini | 1108 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1108 insertions(+)
 create mode 100644 polybar/cuts/modules.ini

(limited to 'polybar/cuts/modules.ini')

diff --git a/polybar/cuts/modules.ini b/polybar/cuts/modules.ini
new file mode 100644
index 0000000..58ad006
--- /dev/null
+++ b/polybar/cuts/modules.ini
@@ -0,0 +1,1108 @@
+;; ┌────────────────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/alsa]
+type = internal/alsa
+
+; Soundcard to be used
+; Usually in the format hw:# where # is the card number
+; You can find the different card numbers in `/proc/asound/cards`
+master-soundcard = default
+speaker-soundcard = default
+headphone-soundcard = default
+
+; Name of the master, speaker and headphone mixers
+; Use the following command to list available mixer controls:
+; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
+; If master, speaker or headphone-soundcard isn't the default, 
+; use `amixer -c # scontrols` instead where # is the number 
+; of the master, speaker or headphone soundcard respectively
+;
+; Default: Master
+master-mixer = Master
+
+; Optionally define speaker and headphone mixers
+; Default: none
+;;speaker-mixer = Speaker
+; Default: none
+;;headphone-mixer = Headphone
+
+; NOTE: This is required if headphone_mixer is defined
+; Use the following command to list available device controls
+; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
+; You may also need to use `amixer -c # controls` as above for the mixer names
+; Default: none
+;;headphone-id = 9
+
+; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
+; Default: false
+;;mapped = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <label-volume>
+format-volume-background = ${color.background}
+format-volume-padding = 1
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+format-muted-background = ${color.background}
+format-muted-padding = 1
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+label-muted = " Muted"
+label-muted-foreground = ${color.foreground}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+
+; If defined, it will replace <ramp-volume> when
+; headphones are plugged in to `headphone_control_numid`
+; If undefined, <ramp-volume> will be used for both
+; Only applies if <ramp-volume> is used
+ramp-headphones-0 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/backlight]
+;type = internal/xbacklight
+type = internal/backlight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+;card = intel_backlight
+card = amdgpu_bl0
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp> <label>
+format-background = ${color.background}
+format-padding = 1
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/battery]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+full-at = 99
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT1
+adapter = ACAD
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 2
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <label-charging>
+format-charging-prefix = " "
+format-charging-background = ${color.background}
+format-charging-padding = 1
+
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <label-discharging>
+format-discharging-prefix = " "
+format-discharging-background = ${color.background}
+format-discharging-padding = 1
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+format-full = <label-full>
+format-full-prefix = " "
+format-full-background = ${color.background}
+format-full-padding = 1
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+label-charging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+label-discharging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+label-full = Full
+
+; Only applies if <ramp-capacity> is used
+ramp-capacity-0 = 
+ramp-capacity-1 = 
+ramp-capacity-2 = 
+ramp-capacity-3 = 
+ramp-capacity-4 = 
+
+; Only applies if <bar-capacity> is used
+;bar-capacity-width = 10
+
+; Only applies if <animation-charging> is used
+animation-charging-0 = 
+animation-charging-1 = 
+
+; Framerate in milliseconds
+animation-charging-framerate = 750
+
+; Only applies if <animation-discharging> is used
+;;animation-discharging-0 = ${battery.anim0}
+;;animation-discharging-1 = ${battery.anim1}
+
+; Framerate in milliseconds
+;animation-discharging-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;;[module/bspwm]
+;;type = internal/bspwm
+
+; Only show workspaces defined on the same output as the bar
+; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
+; Default: true
+;;pin-workspaces = true
+
+; Output mode flags after focused state label
+; Default: false
+;;inline-mode = false
+
+; Create click handler used to focus workspace
+; Default: true
+;;enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+;;enable-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+;;reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+;;fuzzy-match = true
+
+; ws-icon-[0-9]+ = label;icon
+; Note that the label needs to correspond with the bspwm workspace name
+;;ws-icon-0 = code;♚
+;;ws-icon-1 = office;♛
+;;ws-icon-2 = graphics;♜
+;;ws-icon-3 = mail;♝
+;;ws-icon-4 = web;♞
+;;ws-icon-default = ♟
+
+; Available tags:
+;   <label-monitor>
+;   <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)>
+;   <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)>
+; Default: <label-state>
+;;format = <label-state> <label-mode>
+
+; Available tokens:
+;   %name%
+; Default: %name%
+;;label-monitor = %name%
+
+; If any values for label-dimmed-N are defined, the workspace/mode
+; colors will get overridden with those values if the monitor is out of focus
+; To only override workspaces in a specific state, use:
+;   label-dimmed-focused
+;   label-dimmed-occupied
+;   label-dimmed-urgent
+;   label-dimmed-empty
+;;label-dimmed-foreground = #555
+;;label-dimmed-underline = ${bar/top.background}
+;;label-dimmed-focused-background = #f00
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-focused = %icon%
+;;label-focused-foreground = #ffffff
+;;label-focused-background = #3f3f3f
+;;label-focused-underline = #fba922
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-occupied = %icon%
+;;label-occupied-underline = #555555
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-urgent = %icon%
+;;label-urgent-foreground = #000000
+;;label-urgent-background = #bd2c40
+;;label-urgent-underline = #9b0a20
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-empty = %icon%
+;;label-empty-foreground = #55
+
+; The following labels will be used to indicate the layout/mode
+; for the focused workspace. Requires <label-mode>
+;
+; Available tokens:
+;   None
+;label-monocle = 
+;label-tiled = 
+;label-fullscreen = 
+;label-floating = 
+;label-pseudotiled = P
+;label-locked = 
+;label-locked-foreground = #bd2c40
+;label-sticky = 
+;label-sticky-foreground = #fba922
+;label-private = 
+;label-private-foreground = #bd2c40
+
+; Separator in between workspaces
+;;label-separator = |
+;;label-separator-padding = 2
+;;label-separator-foreground = #ffb52a
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/cpu]
+type = internal/cpu
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label> (default)
+;   <bar-load>
+;   <ramp-load>
+;   <ramp-coreload>
+;;format = <label> <ramp-coreload>
+format = <label>
+format-prefix = 
+format-background = ${color.background}
+format-padding = 1
+
+; Available tokens:
+;   %percentage% (default) - total cpu load averaged over all cores
+;   %percentage-sum% - Cumulative load on all cores
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = " %percentage%%"
+
+; Spacing between individual per-core ramps
+;;ramp-coreload-spacing = 1
+;;ramp-coreload-0 = ${cpu.load0}
+;;ramp-coreload-1 = ${cpu.load1}
+
+;;ramp-load-0 = ${cpu.load0}
+;;ramp-load-1 = ${cpu.load1}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/date]
+type = internal/date
+
+; Seconds to sleep between updates
+interval = 1.0
+
+; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+;;date = %Y-%m-%d%
+
+; Optional time format
+time = " %I:%M %p"
+
+; if `date-alt` or `time-alt` is defined, clicking
+; the module will toggle between formats
+;;date-alt = %A, %d %B %Y
+time-alt = " %a, %d %b %Y"
+
+; Available tags:
+;   <label> (default)
+format = <label>
+format-background = ${color.background}
+format-padding = 1
+
+; Available tokens:
+;   %date%
+;   %time%
+; Default: %date%
+label = %time%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/filesystem]
+type = internal/fs
+
+; Mountpoints to display
+mount-0 = /
+;;mount-1 = /home
+;;mount-2 = /var
+
+; Seconds to sleep between updates
+; Default: 30
+interval = 30
+
+; Display fixed precision values
+; Default: false
+fixed-values = true
+
+; Spacing between entries
+; Default: 2
+;;spacing = 4
+
+; Available tags:
+;   <label-mounted> (default)
+;   <bar-free>
+;   <bar-used>
+;   <ramp-capacity>
+format-mounted = <label-mounted>
+format-mounted-prefix = 
+format-mounted-background = ${color.background}
+format-mounted-padding = 1
+
+; Available tags:
+;   <label-unmounted> (default)
+format-unmounted = <label-unmounted>
+format-unmounted-prefix = 
+format-unmounted-background = ${color.background}
+format-unmounted-padding = 1
+
+; Available tokens:
+;   %mountpoint%
+;   %type%
+;   %fsname%
+;   %percentage_free%
+;   %percentage_used%
+;   %total%
+;   %free%
+;   %used%
+; Default: %mountpoint% %percentage_free%%
+label-mounted = " %free%"
+
+; Available tokens:
+;   %mountpoint%
+; Default: %mountpoint% is not mounted
+label-unmounted = " %mountpoint%: not mounted"
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;;[module/github]
+;;type = internal/github
+
+; Accessing an access token stored in file
+;;token = ${file:/path/to/file/containing/github/access.token}
+
+; Accessing an access token stored in an environment variable
+;;token = ${env:GITHUB_ACCESS_TOKEN}
+
+; Whether empty notifications should be displayed or not
+;;empty-notifications = false
+
+; Number of seconds in between requests
+;;interval = 10
+
+; Available tags:
+;   <label> (default)
+;;format = <label>
+;;format-prefix = 
+
+; Available tokens:
+;   %notifications% (default)
+; Default: Notifications: %notifications%
+;;label = %notifications%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;;[module/i3]
+;;type = internal/i3
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+;;pin-workspaces = true
+
+; This will split the workspace name on ':'
+; Default: false
+;;strip-wsnumbers = true
+
+; Sort the workspaces by index instead of the default
+; sorting that groups the workspaces by output
+; Default: false
+;;index-sort = true
+
+; Create click handler used to focus workspace
+; Default: true
+;;enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+;;enable-scroll = false
+
+; Wrap around when reaching the first/last workspace
+; Default: true
+;;wrapping-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+;;reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+;;fuzzy-match = true
+
+; ws-icon-[0-9]+ = label;icon
+; NOTE: The label needs to match the name of the i3 workspace
+;;ws-icon-0 = 1;♚
+;;ws-icon-1 = 2;♛
+;;ws-icon-2 = 3;♜
+;;ws-icon-3 = 4;♝
+;;ws-icon-4 = 5;♞
+;;ws-icon-default = ♟
+; NOTE: You cannot skip icons, e.g. to get a ws-icon-6
+; you must also define a ws-icon-5.
+
+; Available tags:
+;   <label-state> (default) - gets replaced with <label-(focused|unfocused|visible|urgent)>
+;   <label-mode> (default)
+;;format = <label-state> <label-mode>
+
+; Available tokens:
+;   %mode%
+; Default: %mode%
+;;label-mode = %mode%
+;;label-mode-padding = 2
+;;label-mode-background = #e60053
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-focused = %index%
+;;label-focused-foreground = #ffffff
+;;label-focused-background = #3f3f3f
+;;label-focused-underline = #fba922
+;;label-focused-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-unfocused = %index%
+;;label-unfocused-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-visible = %index%
+;;label-visible-underline = #555555
+;;label-visible-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-urgent = %index%
+;;label-urgent-foreground = #000000
+;;label-urgent-background = #bd2c40
+;;label-urgent-padding = 4
+
+; Separator in between workspaces
+;;label-separator = |
+;;label-separator-padding = 2
+;;label-separator-foreground = #ffb52a
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/memory]
+type = internal/memory
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+;   <ramp-used>
+;   <ramp-free>
+;   <bar-swap-used>
+;   <bar-swap-free>
+;   <ramp-swap-used>
+;   <ramp-swap-free>
+format = <label>
+format-prefix = 
+format-background = ${color.background}
+format-padding = 1
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+;   %percentage_swap_used%
+;   %percentage_swap_free%
+;   %mb_swap_total%
+;   %mb_swap_free%
+;   %mb_swap_used%
+;   %gb_swap_total%
+;   %gb_swap_free%
+;   %gb_swap_used%
+
+label = " %mb_used%"
+
+; Only applies if <ramp-used> is used
+;;ramp-used-0 = ${memory.used0}
+;;ramp-used-1 = ${memory.used1}
+;;ramp-used-2 = ${memory.used2}
+
+; Only applies if <ramp-free> is used
+;;ramp-free-0 = ${memory.free0}
+;;ramp-free-1 = ${memory.free1}
+;;ramp-free-2 = ${memory.free2}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online = <label-song> <icon-prev> <toggle> <icon-next>
+format-online-prefix = 
+format-online-background = ${color.background}
+format-online-padding = 1
+
+;format-playing = ${self.format-online}
+;format-paused = ${self.format-online}
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+format-offline = <label-offline>
+format-offline-prefix = 
+format-offline-background = ${color.background}
+format-offline-padding = 1
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song =  " %artist% - %title%"
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+label-time = %elapsed% / %total%
+
+; Available tokens:
+;   None
+label-offline = " Offline"
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-pause = 
+icon-stop = 
+icon-next = 
+icon-prev = 
+icon-seekf = 
+icon-seekb = 
+icon-random = 
+icon-repeat = 
+icon-repeatone = 
+icon-single = 
+icon-consume =
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+toggle-on-foreground = ${color.green}
+toggle-off-foreground = ${color.red}
+
+; Only applies if <bar-progress> is used
+;;bar-progress-width = 45
+;;bar-progress-indicator = |
+;;bar-progress-fill = ─
+;;bar-progress-empty = ─
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; If you use both a wired and a wireless network, just add 2 module definitions. For example
+[module/wired-network]
+type = internal/network
+interface = eth0
+
+[module/wireless-network]
+type = internal/network
+interface = wlp3s0
+
+; Normal Module
+[module/network]
+type = internal/network
+interface = wlan0
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1.0
+
+; Test connectivity every Nth update
+; A value of 0 disables the feature
+; NOTE: Experimental (needs more testing)
+; Default: 0
+;ping-interval = 3
+
+; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
+; Minimum output width of upload/download rate
+; Default: 3
+;;udspeed-minwidth = 5
+
+; Accumulate values from all interfaces
+; when querying for up/downspeed rate
+; Default: false
+accumulate-stats = true
+
+; Consider an `UNKNOWN` interface state as up.
+; Some devices have an unknown state, even when they're running
+; Default: false
+unknown-as-up = true
+
+; Available tags:
+;   <label-connected> (default)
+;   <ramp-signal>
+format-connected = <label-connected>
+format-connected-prefix = 
+format-connected-background = ${color.background}
+format-connected-padding = 1
+
+; Available tags:
+;   <label-disconnected> (default)
+format-disconnected = <label-disconnected>
+format-disconnected-prefix = 
+format-disconnected-background = ${color.background}
+format-disconnected-padding = 1
+
+; Available tags:
+;   <label-connected> (default)
+;   <label-packetloss>
+;   <animation-packetloss>
+;;format-packetloss = <animation-packetloss> <label-connected>
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: %ifname% %local_ip%
+label-connected = "%{A1:networkmanager_dmenu &:} %essid%  %downspeed%  %upspeed%%{A}"
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+; Default: (none)
+label-disconnected = "%{A1:networkmanager_dmenu &:} Offline%{A}"
+;;label-disconnected-foreground = #66ffffff
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: (none)
+;label-packetloss = %essid%
+;label-packetloss-foreground = #eefafafa
+
+; Only applies if <ramp-signal> is used
+ramp-signal-0 = 
+ramp-signal-1 = 
+ramp-signal-2 = 
+
+; Only applies if <animation-packetloss> is used
+;;animation-packetloss-0 = ⚠
+;;animation-packetloss-0-foreground = #ffa64c
+;;animation-packetloss-1 = ⚠
+;;animation-packetloss-1-foreground = #000000
+; Framerate in milliseconds
+;;animation-packetloss-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/pulseaudio]
+type = internal/pulseaudio
+
+; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
+; If not, uses default sink
+sink = alsa_output.pci-0000_03_00.6.analog-stereo
+
+; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
+; Default: true
+use-ui-max = false
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <label-volume>
+format-volume-background = ${color.background}
+format-volume-padding = 1
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+format-muted-background = ${color.background}
+format-muted-padding = 1
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+label-muted = " Muted"
+label-muted-foreground = ${color.foreground}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/temperature]
+type = internal/temperature
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Thermal zone to use
+; To list all the zone types, run 
+; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
+; Default: 0
+thermal-zone = 0
+
+; Full path of temperature sysfs path
+; Use `sensors` to find preferred temperature source, then run
+; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
+; to find path to desired file
+; Default reverts to thermal zone setting
+;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
+hwmon-path = /sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/hwmon/hwmon0/temp1_input
+
+; Threshold temperature to display warning label (in degrees celsius)
+; Default: 80
+warn-temperature = 65
+
+; Whether or not to show units next to the temperature tokens (°C, °F)
+; Default: true
+units = true
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+format = <ramp> <label>
+format-background = ${color.background}
+format-padding = 1
+
+; Available tags:
+;   <label-warn> (default)
+;   <ramp>
+format-warn = <ramp> <label-warn>
+format-warn-background = ${color.background}
+format-warn-padding = 1
+
+; Available tokens:
+;   %temperature% (deprecated)
+;   %temperature-c%   (default, temperature in °C)
+;   %temperature-f%   (temperature in °F)
+label = %temperature-c%
+
+; Available tokens:
+;   %temperature% (deprecated)
+;   %temperature-c%   (default, temperature in °C)
+;   %temperature-f%   (temperature in °F)
+label-warn = "%temperature-c%"
+label-warn-foreground = ${color.red}
+
+; Requires the <ramp> tag
+; The icon selection will range from 0 to `warn-temperature`
+; with the current temperature as index.
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/keyboard]
+type = internal/xkeyboard
+
+; List of indicators to ignore
+blacklist-0 = num lock
+blacklist-1 = scroll lock
+
+; Available tags:
+;   <label-layout> (default)
+;   <label-indicator> (default)
+format = <label-layout> <label-indicator>
+format-background = ${color.background}
+format-padding = 1
+format-prefix = 
+
+; Available tokens:
+;   %layout%
+;   %name%
+;   %number%
+; Default: %layout%
+label-layout = " %layout%"
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-indicator-on = %name%
+label-indicator-on-foreground = ${color.primary}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/title]
+type = internal/xwindow
+
+; Available tags:
+;   <label> (default)
+format = <label>
+format-background = ${color.background}
+format-padding = 0
+;format-prefix = 
+
+; Available tokens:
+;   %title%
+; Default: %title%
+label = "%title%"
+label-maxlen = 30
+
+; Used instead of label when there is no window title
+;;label-empty = Arch Linux
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/workspaces]
+type = internal/xworkspaces
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+pin-workspaces = true
+
+; Create click handler used to focus desktop
+; Default: true
+enable-click = true
+
+; Create scroll handlers used to cycle desktops
+; Default: true
+enable-scroll = true
+
+; icon-[0-9]+ = <desktop-name>;<icon>
+; NOTE: The desktop name needs to match the name configured by the WM
+; You can get a list of the defined desktops using:
+; $ xprop -root _NET_DESKTOP_NAMES
+icon-0 = 1;I
+icon-1 = 2;II
+icon-2 = 3;III
+icon-3 = 4;IV
+icon-4 = 5;V
+icon-default = VI 
+
+
+; Available tags:
+;   <label-monitor>
+;   <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
+; Default: <label-state>
+format = <label-state>
+format-background = ${color.background}
+format-padding = 0
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-monitor = %name%
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-active = %icon%
+label-active-foreground = ${color.red}
+label-active-overline = ${color.red}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-occupied = %icon%
+label-occupied-foreground = ${color.yellow}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-urgent = %icon%
+label-urgent-foreground = ${color.green}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+label-empty = %icon%
+
+label-active-padding = 1
+label-urgent-padding = 1
+label-occupied-padding = 1
+label-empty-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-- 
cgit v1.2.1