diff options
24 files changed, 1 insertions, 3377 deletions
diff --git a/polybar/cuts/bars.ini b/polybar/cuts/bars.ini index 43edc3a..0440c08 100644 --- a/polybar/cuts/bars.ini +++ b/polybar/cuts/bars.ini @@ -1,12 +1,3 @@ -;; ┌────────────────────────────────────────────────────┐ -;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▄░█▀█░█▀▄░█▀▀│ -;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▄░█▀█░█▀▄░▀▀█│ -;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀░░▀░▀░▀░▀░▀▀▀│ -;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░│ -;; └────────────────────────────────────────────────────┘ - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [bar] fill = ﭳ empty = ﭳ @@ -14,495 +5,44 @@ indicator = width = 6 format = %{T4}%fill%%indicator%%empty%%{F-}%{T-} -[module/volume] -type = internal/alsa - -; Soundcard to be used -; Usually in the format hw:# where # is the card number -; You can find the different card numbers in `/proc/asound/cards` -master-soundcard = default -speaker-soundcard = default -headphone-soundcard = default - -; Name of the master, speaker and headphone mixers -; Use the following command to list available mixer controls: -; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p" -; If master, speaker or headphone-soundcard isn't the default, -; use `amixer -c # scontrols` instead where # is the number -; of the master, speaker or headphone soundcard respectively -; -; Default: Master -master-mixer = Master - -; Optionally define speaker and headphone mixers -; Default: none -;;speaker-mixer = Speaker -; Default: none -;;headphone-mixer = Headphone - -; NOTE: This is required if headphone_mixer is defined -; Use the following command to list available device controls -; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort -; You may also need to use `amixer -c # controls` as above for the mixer names -; Default: none -;;headphone-id = 9 - -; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear -; Default: false -;;mapped = true - -; Interval for volume increase/decrease (in percent points) -; Default: 5 -interval = 5 - -; Available tags: -; <label-volume> (default) -; <ramp-volume> -; <bar-volume> -format-volume = <ramp-volume> <bar-volume> -format-volume-background = ${color.background} -format-volume-padding = 1 - -; Available tags: -; <label-muted> (default) -; <ramp-volume> -; <bar-volume> -format-muted = <label-muted> -format-muted-prefix = -format-muted-background = ${color.background} -format-muted-padding = 1 - -; Available tokens: -; %percentage% (default) -label-volume = %percentage%% - -; Available tokens: -; %percentage% (default -label-muted = " Muted" -label-muted-foreground = ${color.foreground} - -; Only applies if <ramp-volume> is used -ramp-volume-0 = -ramp-volume-1 = -ramp-volume-2 = - -; Only applies if <bar-volume> is used -bar-volume-format = ${bar.format} -bar-volume-width = ${bar.width} -bar-volume-gradient = false - -bar-volume-indicator = ${bar.indicator} -bar-volume-indicator-foreground = ${color.foreground} - -bar-volume-fill = ${bar.fill} -bar-volume-foreground-0 = ${color.green} -bar-volume-foreground-1 = ${color.green} -bar-volume-foreground-2 = ${color.yellow} -bar-volume-foreground-3 = ${color.yellow} -bar-volume-foreground-4 = ${color.red} - -bar-volume-empty = ${bar.empty} -bar-volume-empty-foreground = ${color.foreground-alt} - -; If defined, it will replace <ramp-volume> when -; headphones are plugged in to `headphone_control_numid` -; If undefined, <ramp-volume> will be used for both -; Only applies if <ramp-volume> is used -ramp-headphones-0 = - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/brightness] -;type = internal/xbacklight -type = internal/backlight - -; Use the following command to list available cards: -; $ ls -1 /sys/class/backlight/ -;card = intel_backlight -card = amdgpu_bl0 - -; Available tags: -; <label> (default) -; <ramp> -; <bar> -format = <ramp> <bar> -format-background = ${color.background} -format-padding = 1 - -; Available tokens: -; %percentage% (default) -label = %percentage%% - -; Only applies if <ramp> is used -ramp-0 = -ramp-1 = -ramp-2 = -ramp-3 = -ramp-4 = - -; Only applies if <bar> is used -bar-format = ${bar.format} -bar-width = ${bar.width} -bar-gradient = false - -bar-indicator = ${bar.indicator} -bar-indicator-foreground = ${color.foreground} - -bar-fill = ${bar.fill} -bar-foreground-0 = ${color.green} -bar-foreground-1 = ${color.green} -bar-foreground-2 = ${color.yellow} -bar-foreground-3 = ${color.yellow} -bar-foreground-4 = ${color.red} - -bar-empty = ${bar.empty} -bar-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/battery_bar] -type = internal/battery - -; This is useful in case the battery never reports 100% charge -full-at = 99 - -; Use the following command to list batteries and adapters: -; $ ls -1 /sys/class/power_supply/ -battery = BAT1 -adapter = ACAD - -; If an inotify event haven't been reported in this many -; seconds, manually poll for new values. -; -; Needed as a fallback for systems that don't report events -; on sysfs/procfs. -; -; Disable polling by setting the interval to 0. -; -; Default: 5 -poll-interval = 2 - -; see "man date" for details on how to format the time string -; NOTE: if you want to use syntax tags here you need to use %%{...} -; Default: %H:%M:%S -time-format = %H:%M - -; Available tags: -; <label-charging> (default) -; <bar-capacity> -; <ramp-capacity> -; <animation-charging> -format-charging = <bar-capacity> -format-charging-prefix = " " -format-charging-background = ${color.background} -format-charging-padding = 1 - -; Available tags: -; <label-discharging> (default) -; <bar-capacity> -; <ramp-capacity> -; <animation-discharging> -format-discharging = <bar-capacity> -format-discharging-prefix = " " -format-discharging-background = ${color.background} -format-discharging-padding = 1 - -; Available tags: -; <label-full> (default) -; <bar-capacity> -; <ramp-capacity> -format-full = <label-full> -format-full-prefix = " " -format-full-background = ${color.background} -format-full-padding = 1 - -; Available tokens: -; %percentage% (default) -; %time% -; %consumption% (shows current charge rate in watts) - -label-charging = %percentage%% - -; Available tokens: -; %percentage% (default) -; %time% -; %consumption% (shows current discharge rate in watts) -label-discharging = %percentage%% - -; Available tokens: -; %percentage% (default) -label-full = " Full" - -; Only applies if <bar-capacity> is used -bar-capacity-format = ${bar.format} -bar-capacity-width = ${bar.width} -bar-capacity-gradient = false - -bar-capacity-indicator = ${bar.indicator} -bar-capacity-indicator-foreground = ${color.foreground} - -bar-capacity-fill = ${bar.fill} -bar-capacity-foreground-0 = ${color.green} -bar-capacity-foreground-1 = ${color.green} -bar-capacity-foreground-2 = ${color.yellow} -bar-capacity-foreground-3 = ${color.yellow} -bar-capacity-foreground-4 = ${color.red} - -bar-capacity-empty = ${bar.empty} -bar-capacity-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/cpu_bar] -type = internal/cpu - -; Seconds to sleep between updates -; Default: 1 -interval = 0.5 - -; Available tags: -; <label> (default) -; <bar-load> -; <ramp-load> -; <ramp-coreload> -;;format = <label> <ramp-coreload> -format = <bar-load> <label> -format-prefix = " " -format-background = ${color.background} -format-padding = 1 - -; Available tokens: -; %percentage% (default) - total cpu load averaged over all cores -; %percentage-sum% - Cumulative load on all cores -; %percentage-cores% - load percentage for each core -; %percentage-core[1-9]% - load percentage for specific core -label = "%percentage%%" - -; Only applies if <bar-load> is used -bar-load-format = ${bar.format} -bar-load-width = ${bar.width} -bar-load-gradient = false - -bar-load-indicator = ${bar.indicator} -bar-load-indicator-foreground = ${color.foreground} - -bar-load-fill = ${bar.fill} -bar-load-foreground-0 = ${color.green} -bar-load-foreground-1 = ${color.green} -bar-load-foreground-2 = ${color.yellow} -bar-load-foreground-3 = ${color.yellow} -bar-load-foreground-4 = ${color.red} - -bar-load-empty = ${bar.empty} -bar-load-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/filesystem_bar] -type = internal/fs - -; Mountpoints to display -mount-0 = / -;;mount-1 = /home -;;mount-2 = /var - -; Seconds to sleep between updates -; Default: 30 -interval = 30 - -; Display fixed precision values -; Default: false -fixed-values = false - -; Spacing between entries -; Default: 2 -;;spacing = 4 - -; Available tags: -; <label-mounted> (default) -; <bar-free> -; <bar-used> -; <ramp-capacity> -format-mounted = <bar-used> <label-mounted> -format-mounted-prefix = " " -format-mounted-background = ${color.background} -format-mounted-padding = 1 - -; Available tags: -; <label-unmounted> (default) -format-unmounted = <label-unmounted> -format-unmounted-prefix = " " -format-unmounted-background = ${color.background} -format-unmounted-padding = 1 - -; Available tokens: -; %mountpoint% -; %type% -; %fsname% -; %percentage_free% -; %percentage_used% -; %total% -; %free% -; %used% -; Default: %mountpoint% %percentage_free%% -label-mounted = %used%/%total% - -; Available tokens: -; %mountpoint% -; Default: %mountpoint% is not mounted -label-unmounted = "%mountpoint%: not mounted" - -; Only applies if <bar-used> is used -bar-used-format = ${bar.format} -bar-used-width = ${bar.width} -bar-used-gradient = false - -bar-used-indicator = ${bar.indicator} -bar-used-indicator-foreground = ${color.foreground} - -bar-used-fill = ${bar.fill} -bar-used-foreground-0 = ${color.green} -bar-used-foreground-1 = ${color.green} -bar-used-foreground-2 = ${color.yellow} -bar-used-foreground-3 = ${color.yellow} -bar-used-foreground-4 = ${color.red} - -bar-used-empty = ${bar.empty} -bar-used-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [module/memory_bar] type = internal/memory - -; Seconds to sleep between updates -; Default: 1 interval = 2 - -; Available tags: -; <label> (default) -; <bar-used> -; <bar-free> -; <ramp-used> -; <ramp-free> -; <bar-swap-used> -; <bar-swap-free> -; <ramp-swap-used> -; <ramp-swap-free> format = <bar-used> <label> format-prefix = " " format-background = ${color.background} format-padding = 1 - -; Available tokens: -; %percentage_used% (default) -; %percentage_free% -; %gb_used% -; %gb_free% -; %gb_total% -; %mb_used% -; %mb_free% -; %mb_total% -; %percentage_swap_used% -; %percentage_swap_free% -; %mb_swap_total% -; %mb_swap_free% -; %mb_swap_used% -; %gb_swap_total% -; %gb_swap_free% -; %gb_swap_used% - label = "%mb_used%" - -; Only applies if <bar-used> is used bar-used-format = ${bar.format} bar-used-width = ${bar.width} bar-used-gradient = false - bar-used-indicator = ${bar.indicator} bar-used-indicator-foreground = ${color.foreground} - bar-used-fill = ${bar.fill} bar-used-foreground-0 = ${color.green} bar-used-foreground-1 = ${color.green} bar-used-foreground-2 = ${color.yellow} bar-used-foreground-3 = ${color.yellow} bar-used-foreground-4 = ${color.red} - bar-used-empty = ${bar.empty} bar-used-empty-foreground = ${color.foreground-alt} -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [module/mpd_bar] type = internal/mpd - -; Host where mpd is running (either ip or domain name) -; Can also be the full path to a unix socket where mpd is running. -;;host = 127.0.0.1 -;;port = 6600 -;;password = mysecretpassword - -; Seconds to sleep between progressbar/song timer sync -; Default: 1 interval = 1 - -; Available tags: -; <label-song> (default) -; <label-time> -; <bar-progress> -; <toggle> - gets replaced with <icon-(pause|play)> -; <toggle-stop> - gets replaced with <icon-(stop|play)> -; <icon-random> -; <icon-repeat> -; <icon-repeatone> (deprecated) -; <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone> -; <icon-consume> -; <icon-prev> -; <icon-stop> -; <icon-play> -; <icon-pause> -; <icon-next> -; <icon-seekb> -; <icon-seekf> format-online = <label-song> <bar-progress> <label-time> format-online-prefix = format-online-background = ${color.background} format-online-padding = 1 - -;format-playing = ${self.format-online} -;format-paused = ${self.format-online} -;format-stopped = ${self.format-online} - -; Available tags: -; <label-offline> format-offline = <label-offline> format-offline-prefix = format-offline-background = ${color.background} format-offline-padding = 1 - -; Available tokens: -; %artist% -; %album-artist% -; %album% -; %date% -; %title% -; Default: %artist% - %title% label-song = " %artist% - %title%" label-song-maxlen = 25 label-song-ellipsis = true - -; Available tokens: -; %elapsed% -; %total% -; Default: %elapsed% / %total% label-time = %elapsed% / %total% - -; Available tokens: -; None label-offline = " Offline" - -; Only applies if <icon-X> is used icon-play = icon-pause = icon-stop = @@ -515,28 +55,18 @@ icon-repeat = icon-repeatone = icon-single = icon-consume = - -; Used to display the state of random/repeat/repeatone/single -; Only applies if <icon-[random|repeat|repeatone|single]> is used toggle-on-foreground = ${color.green} toggle-off-foreground = ${color.red} - -; Only applies if <bar-progress> is used bar-progress-format = ${bar.format} bar-progress-width = ${bar.width} bar-progress-gradient = false - bar-progress-indicator = ${bar.indicator} bar-progress-indicator-foreground = ${color.foreground} - bar-progress-fill = ${bar.fill} bar-progress-foreground-0 = ${color.green} bar-progress-foreground-1 = ${color.green} bar-progress-foreground-2 = ${color.yellow} bar-progress-foreground-3 = ${color.yellow} bar-progress-foreground-4 = ${color.red} - bar-progress-empty = ${bar.empty} bar-progress-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/polybar/cuts/colors.ini b/polybar/cuts/colors.ini index 011de7f..89c6f2f 100644 --- a/polybar/cuts/colors.ini +++ b/polybar/cuts/colors.ini @@ -1,9 +1,5 @@ -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [color] -;; Use pywal.sh in scripts directory to use colors from an image/wallpaper. - ;; Colors background-alt = #8C100f0e foreground-alt = #33e5e5e8 @@ -29,4 +25,3 @@ color12 = ${xrdb:color12} color13 = ${xrdb:color13} color14 = ${xrdb:color14} color15 = ${xrdb:color15} -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/polybar/cuts/config.ini b/polybar/cuts/config.ini index 2bfa4fa..b1f6f76 100644 --- a/polybar/cuts/config.ini +++ b/polybar/cuts/config.ini @@ -1,235 +1,58 @@ -;; ┌────────────────────────────────────────────────────────────┐ -;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ -;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ -;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ -;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ -;; └────────────────────────────────────────────────────────────┘ - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Global WM Settings - [global/wm] -; Adjust the _NET_WM_STRUT_PARTIAL top value -; Used for top aligned bars margin-bottom = 0 - -; Adjust the _NET_WM_STRUT_PARTIAL bottom value -; Used for bottom aligned bars margin-top = 0 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; File Inclusion -; include an external file, like module file, etc. - include-file = ~/.config/polybar/cuts/bars.ini include-file = ~/.config/polybar/cuts/colors.ini include-file = ~/.config/polybar/cuts/modules.ini include-file = ~/.config/polybar/cuts/user_modules.ini -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Bar Settings - [bar/main] -; Use either of the following command to list available outputs: -; If unspecified, the application will pick the first one it finds. -; $ polybar -m | cut -d ':' -f 1 -; $ xrandr -q | grep " connected" | cut -d ' ' -f1 monitor = HDMI-1 - -; Use the specified monitor as a fallback if the main one is not found. monitor-fallback = HDMI-1 - -; Require the monitor to be in connected state -; XRandR sometimes reports my monitor as being disconnected (when in use) monitor-strict = false - -; Tell the Window Manager not to configure the window. -; Use this to detach the bar if your WM is locking its size/position. override-redirect = false - -; Put the bar at the bottom of the screen bottom = false - -; Prefer fixed center position for the `modules-center` block -; When false, the center position will be based on the size of the other blocks. fixed-center = true - -; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), -; the percentage can optionally be extended with a pixel offset like so: -; 50%:-10, this will result in a width or height of 50% minus 10 pixels width = 100% height = 28 - -; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) -; the percentage can optionally be extended with a pixel offset like so: -; 50%:-10, this will result in an offset in the x or y direction -; of 50% minus 10 pixels offset-x = 0% offset-y = 0% - -; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) background = ${color.background-alt} - -; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) foreground = ${color.foreground} - -; Background gradient (vertical steps) -; background-[0-9]+ = #aarrggbb -;;background-0 = - -; Value used for drawing rounded corners -; Note: This shouldn't be used together with border-size because the border -; doesn't get rounded -; Individual top/bottom values can be defined using: -; radius-{top,bottom} radius-top = 0.0 radius-bottom = 0.0 - -; Under-/overline pixel size and argb color -; Individual values can be defined using: -; {overline,underline}-size -; {overline,underline}-color line-size = 2 line-color = ${color.primary} - -; Values applied to all borders -; Individual side values can be defined using: -; border-{left,top,right,bottom}-size -; border-{left,top,right,bottom}-color -; The top and bottom borders are added to the bar height, so the effective -; window height is: -; height + border-top-size + border-bottom-size -; Meanwhile the effective window width is defined entirely by the width key and -; the border is placed withing this area. So you effectively only have the -; following horizontal space on the bar: -; width - border-right-size - border-left-size border-size = 0 border-color = ${color.primary} - -; Number of spaces to add at the beginning/end of the bar -; Individual side values can be defined using: -; padding-{left,right} padding = 0 - -; Number of spaces to add before/after each module -; Individual side values can be defined using: -; module-margin-{left,right} module-margin-left = 0 module-margin-right = 0 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; Fonts are defined using <font-name>;<vertical-offset> -; Font names are specified using a fontconfig pattern. -; font-0 = NotoSans-Regular:size=8;2 -; font-1 = MaterialIcons:size=10 -; font-2 = Termsynu:size=8;-1 -; font-3 = FontAwesome:size=10 -; See the Fonts wiki page for more details - -; Text Fonts font-0 = Iosevka Nerd Font:style=Regular:size=10.3;4 -; Icons Fonts font-1 = feather:style=Medium:size=12;3 -; Powerline Glyphs font-2 = Iosevka Nerd Font:style=Medium:size=19;3 -; Larger font size for bar fill icons font-3 = Iosevka Nerd Font:style=Medium:size=12;4 -; Smaller font size for shorter spaces font-4 = Iosevka Nerd Font:style=Medium:size=7;4 -; Japanese font-5 = Sazanami Gothic:style=Gothic-Regular:size=10;2.5 -; Modules are added to one of the available blocks -; modules-left = cpu ram -; modules-center = xwindow xbacklight -; modules-right = ipc clock - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [bar/top] inherit = bar/main modules-left = workspaces decor1 decor2 updates decor1 modules-right = decor4 memory date modules-center = decor2 mpd decor3 enable-ipc = true - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; The separator will be inserted between the output of each module separator = - -; Opacity value between 0.0 and 1.0 used on fade in/out dim-value = 1.0 - -; Value to be used to set the WM_NAME atom -; If the value is empty or undefined, the atom value -; will be created from the following template: polybar-[BAR]_[MONITOR] -; NOTE: The placeholders are not available for custom values wm-name = - -; Locale used to localize various module data (e.g. date) -; Expects a valid libc locale, for example: sv_SE.UTF-8 locale = - -; Position of the system tray window -; If empty or undefined, tray support will be disabled -; NOTE: A center aligned tray will cover center aligned modules -; -; Available positions: -; left -; center -; right -; none tray-position = right - -; If true, the bar will not shift its -; contents when the tray changes tray-detached = false - -; Tray icon max size tray-maxsize = 16 - -; Background color for the tray container -; ARGB color (e.g. #f00, #ff992a, #ddff1023) -; By default the tray container will use the bar -; background color. tray-background = ${color.background} - -; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) tray-offset-x = 0 tray-offset-y = 0 - -; Pad the sides of each tray icon tray-padding = 0 - -; Scale factor for tray clients tray-scale = 1.0 - -; Restack the bar window and put it above the -; selected window manager's root -; -; Fixes the issue where the bar is being drawn -; on top of fullscreen window's -; -; Currently supported WM's: -; bspwm -; i3 (requires: `override-redirect = true`) -;;wm-restack = - -; Set a DPI values used when rendering text -; This only affects scalable fonts -; dpi = - -; Enable support for inter-process messaging -; See the Messaging wiki page for more details. -;enable-ipc = true - -; Fallback click handlers that will be called if -; there's no matching module handler found. click-left = click-middle = click-right = @@ -238,71 +61,16 @@ scroll-down = double-click-left = double-click-middle = double-click-right = - -; Requires polybar to be built with xcursor support (xcb-util-cursor) -; Possible values are: -; - default : The default pointer as before, can also be an empty string (default) -; - pointer : Typically in the form of a hand -; - ns-resize : Up and down arrows, can be used to indicate scrolling cursor-click = cursor-scroll = -;; WM Workspace Specific - -; bspwm -;;scroll-up = bspwm-desknext -;;scroll-down = bspwm-deskprev -;;scroll-up = bspc desktop -f prev.local -;;scroll-down = bspc desktop -f next.local - -;i3 -;;scroll-up = i3wm-wsnext -;;scroll-down = i3wm-wsprev -;;scroll-up = i3-msg workspace next_on_output -;;scroll-down = i3-msg workspace prev_on_output - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Application Settings - [settings] -; The throttle settings lets the eventloop swallow up til X events -; if they happen within Y millisecond after first event was received. -; This is done to prevent flood of update event. -; -; For example if 5 modules emit an update event at the same time, we really -; just care about the last one. But if we wait too long for events to swallow -; the bar would appear sluggish so we continue if timeout -; expires or limit is reached. throttle-output = 5 throttle-output-for = 10 - -; Time in milliseconds that the input handler will wait between processing events -;throttle-input-for = 30 - -; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events screenchange-reload = false - -; Compositing operators -; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t compositing-background = source compositing-foreground = over compositing-overline = over compositing-underline = over compositing-border = over - -; Define fallback values used by all module formats -;format-foreground = -;format-background = -;format-underline = -;format-overline = -;format-spacing = -;format-padding = -;format-margin = -;format-offset = - -; Enables pseudo-transparency for the bar -; If set to true the bar can be transparent without a compositor. pseudo-transparency = false - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/polybar/cuts/launch.sh b/polybar/cuts/launch.sh index 22fe096..52b4f9d 100755 --- a/polybar/cuts/launch.sh +++ b/polybar/cuts/launch.sh @@ -1,6 +1,7 @@ #!/usr/bin/env bash # Add this script to your wm startup file. + DIR="$HOME/.config/polybar/cuts" # Terminate already running bar instances diff --git a/polybar/cuts/modules.ini b/polybar/cuts/modules.ini index 58ad006..197c4ca 100644 --- a/polybar/cuts/modules.ini +++ b/polybar/cuts/modules.ini @@ -1,731 +1,38 @@ -;; ┌────────────────────────────────────────────────────────────────┐ -;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ -;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ -;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ -;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ -;; └────────────────────────────────────────────────────────────────┘ - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/alsa] -type = internal/alsa - -; Soundcard to be used -; Usually in the format hw:# where # is the card number -; You can find the different card numbers in `/proc/asound/cards` -master-soundcard = default -speaker-soundcard = default -headphone-soundcard = default - -; Name of the master, speaker and headphone mixers -; Use the following command to list available mixer controls: -; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p" -; If master, speaker or headphone-soundcard isn't the default, -; use `amixer -c # scontrols` instead where # is the number -; of the master, speaker or headphone soundcard respectively -; -; Default: Master -master-mixer = Master - -; Optionally define speaker and headphone mixers -; Default: none -;;speaker-mixer = Speaker -; Default: none -;;headphone-mixer = Headphone - -; NOTE: This is required if headphone_mixer is defined -; Use the following command to list available device controls -; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort -; You may also need to use `amixer -c # controls` as above for the mixer names -; Default: none -;;headphone-id = 9 - -; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear -; Default: false -;;mapped = true - -; Interval for volume increase/decrease (in percent points) -; Default: 5 -interval = 5 - -; Available tags: -; <label-volume> (default) -; <ramp-volume> -; <bar-volume> -format-volume = <ramp-volume> <label-volume> -format-volume-background = ${color.background} -format-volume-padding = 1 - -; Available tags: -; <label-muted> (default) -; <ramp-volume> -; <bar-volume> -format-muted = <label-muted> -format-muted-prefix = -format-muted-background = ${color.background} -format-muted-padding = 1 - -; Available tokens: -; %percentage% (default) -label-volume = %percentage%% - -; Available tokens: -; %percentage% (default -label-muted = " Muted" -label-muted-foreground = ${color.foreground} - -; Only applies if <ramp-volume> is used -ramp-volume-0 = -ramp-volume-1 = -ramp-volume-2 = - -; If defined, it will replace <ramp-volume> when -; headphones are plugged in to `headphone_control_numid` -; If undefined, <ramp-volume> will be used for both -; Only applies if <ramp-volume> is used -ramp-headphones-0 = - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/backlight] -;type = internal/xbacklight -type = internal/backlight - -; Use the following command to list available cards: -; $ ls -1 /sys/class/backlight/ -;card = intel_backlight -card = amdgpu_bl0 - -; Available tags: -; <label> (default) -; <ramp> -; <bar> -format = <ramp> <label> -format-background = ${color.background} -format-padding = 1 - -; Available tokens: -; %percentage% (default) -label = %percentage%% - -; Only applies if <ramp> is used -ramp-0 = -ramp-1 = -ramp-2 = -ramp-3 = -ramp-4 = - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/battery] -type = internal/battery - -; This is useful in case the battery never reports 100% charge -full-at = 99 - -; Use the following command to list batteries and adapters: -; $ ls -1 /sys/class/power_supply/ -battery = BAT1 -adapter = ACAD - -; If an inotify event haven't been reported in this many -; seconds, manually poll for new values. -; -; Needed as a fallback for systems that don't report events -; on sysfs/procfs. -; -; Disable polling by setting the interval to 0. -; -; Default: 5 -poll-interval = 2 - -; see "man date" for details on how to format the time string -; NOTE: if you want to use syntax tags here you need to use %%{...} -; Default: %H:%M:%S -time-format = %H:%M - -; Available tags: -; <label-charging> (default) -; <bar-capacity> -; <ramp-capacity> -; <animation-charging> -format-charging = <label-charging> -format-charging-prefix = " " -format-charging-background = ${color.background} -format-charging-padding = 1 - -; Available tags: -; <label-discharging> (default) -; <bar-capacity> -; <ramp-capacity> -; <animation-discharging> -format-discharging = <label-discharging> -format-discharging-prefix = " " -format-discharging-background = ${color.background} -format-discharging-padding = 1 - -; Available tags: -; <label-full> (default) -; <bar-capacity> -; <ramp-capacity> -format-full = <label-full> -format-full-prefix = " " -format-full-background = ${color.background} -format-full-padding = 1 - -; Available tokens: -; %percentage% (default) -; %time% -; %consumption% (shows current charge rate in watts) -label-charging = %percentage%% - -; Available tokens: -; %percentage% (default) -; %time% -; %consumption% (shows current discharge rate in watts) -label-discharging = %percentage%% - -; Available tokens: -; %percentage% (default) -label-full = Full - -; Only applies if <ramp-capacity> is used -ramp-capacity-0 = -ramp-capacity-1 = -ramp-capacity-2 = -ramp-capacity-3 = -ramp-capacity-4 = - -; Only applies if <bar-capacity> is used -;bar-capacity-width = 10 - -; Only applies if <animation-charging> is used -animation-charging-0 = -animation-charging-1 = - -; Framerate in milliseconds -animation-charging-framerate = 750 - -; Only applies if <animation-discharging> is used -;;animation-discharging-0 = ${battery.anim0} -;;animation-discharging-1 = ${battery.anim1} - -; Framerate in milliseconds -;animation-discharging-framerate = 500 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;;[module/bspwm] -;;type = internal/bspwm - -; Only show workspaces defined on the same output as the bar -; NOTE: The bspwm and XRandR monitor names must match, which they do by default. -; Default: true -;;pin-workspaces = true - -; Output mode flags after focused state label -; Default: false -;;inline-mode = false - -; Create click handler used to focus workspace -; Default: true -;;enable-click = false - -; Create scroll handlers used to cycle workspaces -; Default: true -;;enable-scroll = false - -; Set the scroll cycle direction -; Default: true -;;reverse-scroll = false - -; Use fuzzy (partial) matching on labels when assigning -; icons to workspaces -; Example: code;♚ will apply the icon to all workspaces -; containing 'code' in the label -; Default: false -;;fuzzy-match = true - -; ws-icon-[0-9]+ = label;icon -; Note that the label needs to correspond with the bspwm workspace name -;;ws-icon-0 = code;♚ -;;ws-icon-1 = office;♛ -;;ws-icon-2 = graphics;♜ -;;ws-icon-3 = mail;♝ -;;ws-icon-4 = web;♞ -;;ws-icon-default = ♟ - -; Available tags: -; <label-monitor> -; <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)> -; <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)> -; Default: <label-state> -;;format = <label-state> <label-mode> - -; Available tokens: -; %name% -; Default: %name% -;;label-monitor = %name% - -; If any values for label-dimmed-N are defined, the workspace/mode -; colors will get overridden with those values if the monitor is out of focus -; To only override workspaces in a specific state, use: -; label-dimmed-focused -; label-dimmed-occupied -; label-dimmed-urgent -; label-dimmed-empty -;;label-dimmed-foreground = #555 -;;label-dimmed-underline = ${bar/top.background} -;;label-dimmed-focused-background = #f00 - -; Available tokens: -; %name% -; %icon% -; %index% -; Default: %icon% %name% -;;label-focused = %icon% -;;label-focused-foreground = #ffffff -;;label-focused-background = #3f3f3f -;;label-focused-underline = #fba922 - -; Available tokens: -; %name% -; %icon% -; %index% -; Default: %icon% %name% -;;label-occupied = %icon% -;;label-occupied-underline = #555555 - -; Available tokens: -; %name% -; %icon% -; %index% -; Default: %icon% %name% -;;label-urgent = %icon% -;;label-urgent-foreground = #000000 -;;label-urgent-background = #bd2c40 -;;label-urgent-underline = #9b0a20 - -; Available tokens: -; %name% -; %icon% -; %index% -; Default: %icon% %name% -;;label-empty = %icon% -;;label-empty-foreground = #55 - -; The following labels will be used to indicate the layout/mode -; for the focused workspace. Requires <label-mode> -; -; Available tokens: -; None -;label-monocle = -;label-tiled = -;label-fullscreen = -;label-floating = -;label-pseudotiled = P -;label-locked = -;label-locked-foreground = #bd2c40 -;label-sticky = -;label-sticky-foreground = #fba922 -;label-private = -;label-private-foreground = #bd2c40 - -; Separator in between workspaces -;;label-separator = | -;;label-separator-padding = 2 -;;label-separator-foreground = #ffb52a - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/cpu] -type = internal/cpu - -; Seconds to sleep between updates -; Default: 1 -interval = 1 - -; Available tags: -; <label> (default) -; <bar-load> -; <ramp-load> -; <ramp-coreload> -;;format = <label> <ramp-coreload> -format = <label> -format-prefix = -format-background = ${color.background} -format-padding = 1 - -; Available tokens: -; %percentage% (default) - total cpu load averaged over all cores -; %percentage-sum% - Cumulative load on all cores -; %percentage-cores% - load percentage for each core -; %percentage-core[1-9]% - load percentage for specific core -label = " %percentage%%" - -; Spacing between individual per-core ramps -;;ramp-coreload-spacing = 1 -;;ramp-coreload-0 = ${cpu.load0} -;;ramp-coreload-1 = ${cpu.load1} - -;;ramp-load-0 = ${cpu.load0} -;;ramp-load-1 = ${cpu.load1} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [module/date] type = internal/date - -; Seconds to sleep between updates interval = 1.0 - -; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string -; NOTE: if you want to use syntax tags here you need to use %%{...} -;;date = %Y-%m-%d% - -; Optional time format time = " %I:%M %p" - -; if `date-alt` or `time-alt` is defined, clicking -; the module will toggle between formats -;;date-alt = %A, %d %B %Y time-alt = " %a, %d %b %Y" - -; Available tags: -; <label> (default) format = <label> format-background = ${color.background} format-padding = 1 - -; Available tokens: -; %date% -; %time% -; Default: %date% label = %time% -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/filesystem] -type = internal/fs - -; Mountpoints to display -mount-0 = / -;;mount-1 = /home -;;mount-2 = /var - -; Seconds to sleep between updates -; Default: 30 -interval = 30 - -; Display fixed precision values -; Default: false -fixed-values = true - -; Spacing between entries -; Default: 2 -;;spacing = 4 - -; Available tags: -; <label-mounted> (default) -; <bar-free> -; <bar-used> -; <ramp-capacity> -format-mounted = <label-mounted> -format-mounted-prefix = -format-mounted-background = ${color.background} -format-mounted-padding = 1 - -; Available tags: -; <label-unmounted> (default) -format-unmounted = <label-unmounted> -format-unmounted-prefix = -format-unmounted-background = ${color.background} -format-unmounted-padding = 1 - -; Available tokens: -; %mountpoint% -; %type% -; %fsname% -; %percentage_free% -; %percentage_used% -; %total% -; %free% -; %used% -; Default: %mountpoint% %percentage_free%% -label-mounted = " %free%" - -; Available tokens: -; %mountpoint% -; Default: %mountpoint% is not mounted -label-unmounted = " %mountpoint%: not mounted" - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;;[module/github] -;;type = internal/github - -; Accessing an access token stored in file -;;token = ${file:/path/to/file/containing/github/access.token} - -; Accessing an access token stored in an environment variable -;;token = ${env:GITHUB_ACCESS_TOKEN} - -; Whether empty notifications should be displayed or not -;;empty-notifications = false - -; Number of seconds in between requests -;;interval = 10 - -; Available tags: -; <label> (default) -;;format = <label> -;;format-prefix = - -; Available tokens: -; %notifications% (default) -; Default: Notifications: %notifications% -;;label = %notifications% - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;;[module/i3] -;;type = internal/i3 - -; Only show workspaces defined on the same output as the bar -; -; Useful if you want to show monitor specific workspaces -; on different bars -; -; Default: false -;;pin-workspaces = true - -; This will split the workspace name on ':' -; Default: false -;;strip-wsnumbers = true - -; Sort the workspaces by index instead of the default -; sorting that groups the workspaces by output -; Default: false -;;index-sort = true - -; Create click handler used to focus workspace -; Default: true -;;enable-click = false - -; Create scroll handlers used to cycle workspaces -; Default: true -;;enable-scroll = false - -; Wrap around when reaching the first/last workspace -; Default: true -;;wrapping-scroll = false - -; Set the scroll cycle direction -; Default: true -;;reverse-scroll = false - -; Use fuzzy (partial) matching on labels when assigning -; icons to workspaces -; Example: code;♚ will apply the icon to all workspaces -; containing 'code' in the label -; Default: false -;;fuzzy-match = true - -; ws-icon-[0-9]+ = label;icon -; NOTE: The label needs to match the name of the i3 workspace -;;ws-icon-0 = 1;♚ -;;ws-icon-1 = 2;♛ -;;ws-icon-2 = 3;♜ -;;ws-icon-3 = 4;♝ -;;ws-icon-4 = 5;♞ -;;ws-icon-default = ♟ -; NOTE: You cannot skip icons, e.g. to get a ws-icon-6 -; you must also define a ws-icon-5. - -; Available tags: -; <label-state> (default) - gets replaced with <label-(focused|unfocused|visible|urgent)> -; <label-mode> (default) -;;format = <label-state> <label-mode> - -; Available tokens: -; %mode% -; Default: %mode% -;;label-mode = %mode% -;;label-mode-padding = 2 -;;label-mode-background = #e60053 - -; Available tokens: -; %name% -; %icon% -; %index% -; %output% -; Default: %icon% %name% -;;label-focused = %index% -;;label-focused-foreground = #ffffff -;;label-focused-background = #3f3f3f -;;label-focused-underline = #fba922 -;;label-focused-padding = 4 - -; Available tokens: -; %name% -; %icon% -; %index% -; %output% -; Default: %icon% %name% -;;label-unfocused = %index% -;;label-unfocused-padding = 4 - -; Available tokens: -; %name% -; %icon% -; %index% -; %output% -; Default: %icon% %name% -;;label-visible = %index% -;;label-visible-underline = #555555 -;;label-visible-padding = 4 - -; Available tokens: -; %name% -; %icon% -; %index% -; %output% -; Default: %icon% %name% -;;label-urgent = %index% -;;label-urgent-foreground = #000000 -;;label-urgent-background = #bd2c40 -;;label-urgent-padding = 4 - -; Separator in between workspaces -;;label-separator = | -;;label-separator-padding = 2 -;;label-separator-foreground = #ffb52a - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [module/memory] type = internal/memory - -; Seconds to sleep between updates -; Default: 1 interval = 1 - -; Available tags: -; <label> (default) -; <bar-used> -; <bar-free> -; <ramp-used> -; <ramp-free> -; <bar-swap-used> -; <bar-swap-free> -; <ramp-swap-used> -; <ramp-swap-free> format = <label> format-prefix = format-background = ${color.background} format-padding = 1 - -; Available tokens: -; %percentage_used% (default) -; %percentage_free% -; %gb_used% -; %gb_free% -; %gb_total% -; %mb_used% -; %mb_free% -; %mb_total% -; %percentage_swap_used% -; %percentage_swap_free% -; %mb_swap_total% -; %mb_swap_free% -; %mb_swap_used% -; %gb_swap_total% -; %gb_swap_free% -; %gb_swap_used% - label = " %mb_used%" -; Only applies if <ramp-used> is used -;;ramp-used-0 = ${memory.used0} -;;ramp-used-1 = ${memory.used1} -;;ramp-used-2 = ${memory.used2} - -; Only applies if <ramp-free> is used -;;ramp-free-0 = ${memory.free0} -;;ramp-free-1 = ${memory.free1} -;;ramp-free-2 = ${memory.free2} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [module/mpd] type = internal/mpd - -; Host where mpd is running (either ip or domain name) -; Can also be the full path to a unix socket where mpd is running. -;;host = 127.0.0.1 -;;port = 6600 -;;password = mysecretpassword - -; Seconds to sleep between progressbar/song timer sync -; Default: 1 interval = 1 - -; Available tags: -; <label-song> (default) -; <label-time> -; <bar-progress> -; <toggle> - gets replaced with <icon-(pause|play)> -; <toggle-stop> - gets replaced with <icon-(stop|play)> -; <icon-random> -; <icon-repeat> -; <icon-repeatone> (deprecated) -; <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone> -; <icon-consume> -; <icon-prev> -; <icon-stop> -; <icon-play> -; <icon-pause> -; <icon-next> -; <icon-seekb> -; <icon-seekf> format-online = <label-song> <icon-prev> <toggle> <icon-next> format-online-prefix = format-online-background = ${color.background} format-online-padding = 1 - -;format-playing = ${self.format-online} -;format-paused = ${self.format-online} -;format-stopped = ${self.format-online} - -; Available tags: -; <label-offline> format-offline = <label-offline> format-offline-prefix = format-offline-background = ${color.background} format-offline-padding = 1 - -; Available tokens: -; %artist% -; %album-artist% -; %album% -; %date% -; %title% -; Default: %artist% - %title% label-song = " %artist% - %title%" label-song-maxlen = 25 label-song-ellipsis = true - -; Available tokens: -; %elapsed% -; %total% -; Default: %elapsed% / %total% label-time = %elapsed% / %total% - -; Available tokens: -; None label-offline = " Offline" - -; Only applies if <icon-X> is used icon-play = icon-pause = icon-stop = @@ -738,371 +45,33 @@ icon-repeat = icon-repeatone = icon-single = icon-consume = - -; Used to display the state of random/repeat/repeatone/single -; Only applies if <icon-[random|repeat|repeatone|single]> is used toggle-on-foreground = ${color.green} toggle-off-foreground = ${color.red} -; Only applies if <bar-progress> is used -;;bar-progress-width = 45 -;;bar-progress-indicator = | -;;bar-progress-fill = ─ -;;bar-progress-empty = ─ - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; If you use both a wired and a wireless network, just add 2 module definitions. For example -[module/wired-network] -type = internal/network -interface = eth0 - -[module/wireless-network] -type = internal/network -interface = wlp3s0 - -; Normal Module -[module/network] -type = internal/network -interface = wlan0 - -; Seconds to sleep between updates -; Default: 1 -interval = 1.0 - -; Test connectivity every Nth update -; A value of 0 disables the feature -; NOTE: Experimental (needs more testing) -; Default: 0 -;ping-interval = 3 - -; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%) -; Minimum output width of upload/download rate -; Default: 3 -;;udspeed-minwidth = 5 - -; Accumulate values from all interfaces -; when querying for up/downspeed rate -; Default: false -accumulate-stats = true - -; Consider an `UNKNOWN` interface state as up. -; Some devices have an unknown state, even when they're running -; Default: false -unknown-as-up = true - -; Available tags: -; <label-connected> (default) -; <ramp-signal> -format-connected = <label-connected> -format-connected-prefix = -format-connected-background = ${color.background} -format-connected-padding = 1 - -; Available tags: -; <label-disconnected> (default) -format-disconnected = <label-disconnected> -format-disconnected-prefix = -format-disconnected-background = ${color.background} -format-disconnected-padding = 1 - -; Available tags: -; <label-connected> (default) -; <label-packetloss> -; <animation-packetloss> -;;format-packetloss = <animation-packetloss> <label-connected> - -; Available tokens: -; %ifname% [wireless+wired] -; %local_ip% [wireless+wired] -; %local_ip6% [wireless+wired] -; %essid% [wireless] -; %signal% [wireless] -; %upspeed% [wireless+wired] -; %downspeed% [wireless+wired] -; %linkspeed% [wired] -; Default: %ifname% %local_ip% -label-connected = "%{A1:networkmanager_dmenu &:} %essid% %downspeed% %upspeed%%{A}" - -; Available tokens: -; %ifname% [wireless+wired] -; Default: (none) -label-disconnected = "%{A1:networkmanager_dmenu &:} Offline%{A}" -;;label-disconnected-foreground = #66ffffff - -; Available tokens: -; %ifname% [wireless+wired] -; %local_ip% [wireless+wired] -; %local_ip6% [wireless+wired] -; %essid% [wireless] -; %signal% [wireless] -; %upspeed% [wireless+wired] -; %downspeed% [wireless+wired] -; %linkspeed% [wired] -; Default: (none) -;label-packetloss = %essid% -;label-packetloss-foreground = #eefafafa - -; Only applies if <ramp-signal> is used -ramp-signal-0 = -ramp-signal-1 = -ramp-signal-2 = - -; Only applies if <animation-packetloss> is used -;;animation-packetloss-0 = ⚠ -;;animation-packetloss-0-foreground = #ffa64c -;;animation-packetloss-1 = ⚠ -;;animation-packetloss-1-foreground = #000000 -; Framerate in milliseconds -;;animation-packetloss-framerate = 500 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/pulseaudio] -type = internal/pulseaudio - -; Sink to be used, if it exists (find using `pacmd list-sinks`, name field) -; If not, uses default sink -sink = alsa_output.pci-0000_03_00.6.analog-stereo - -; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false -; Default: true -use-ui-max = false - -; Interval for volume increase/decrease (in percent points) -; Default: 5 -interval = 5 - -; Available tags: -; <label-volume> (default) -; <ramp-volume> -; <bar-volume> -format-volume = <ramp-volume> <label-volume> -format-volume-background = ${color.background} -format-volume-padding = 1 - -; Available tags: -; <label-muted> (default) -; <ramp-volume> -; <bar-volume> -format-muted = <label-muted> -format-muted-prefix = -format-muted-background = ${color.background} -format-muted-padding = 1 - -; Available tokens: -; %percentage% (default) -label-volume = %percentage%% - -; Available tokens: -; %percentage% (default -label-muted = " Muted" -label-muted-foreground = ${color.foreground} - -; Only applies if <ramp-volume> is used -ramp-volume-0 = -ramp-volume-1 = -ramp-volume-2 = - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/temperature] -type = internal/temperature - -; Seconds to sleep between updates -; Default: 1 -interval = 0.5 - -; Thermal zone to use -; To list all the zone types, run -; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done -; Default: 0 -thermal-zone = 0 - -; Full path of temperature sysfs path -; Use `sensors` to find preferred temperature source, then run -; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done -; to find path to desired file -; Default reverts to thermal zone setting -;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input -hwmon-path = /sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/hwmon/hwmon0/temp1_input - -; Threshold temperature to display warning label (in degrees celsius) -; Default: 80 -warn-temperature = 65 - -; Whether or not to show units next to the temperature tokens (°C, °F) -; Default: true -units = true - -; Available tags: -; <label> (default) -; <ramp> -format = <ramp> <label> -format-background = ${color.background} -format-padding = 1 - -; Available tags: -; <label-warn> (default) -; <ramp> -format-warn = <ramp> <label-warn> -format-warn-background = ${color.background} -format-warn-padding = 1 - -; Available tokens: -; %temperature% (deprecated) -; %temperature-c% (default, temperature in °C) -; %temperature-f% (temperature in °F) -label = %temperature-c% - -; Available tokens: -; %temperature% (deprecated) -; %temperature-c% (default, temperature in °C) -; %temperature-f% (temperature in °F) -label-warn = "%temperature-c%" -label-warn-foreground = ${color.red} - -; Requires the <ramp> tag -; The icon selection will range from 0 to `warn-temperature` -; with the current temperature as index. -ramp-0 = -ramp-1 = -ramp-2 = -ramp-3 = -ramp-4 = - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/keyboard] -type = internal/xkeyboard - -; List of indicators to ignore -blacklist-0 = num lock -blacklist-1 = scroll lock - -; Available tags: -; <label-layout> (default) -; <label-indicator> (default) -format = <label-layout> <label-indicator> -format-background = ${color.background} -format-padding = 1 -format-prefix = - -; Available tokens: -; %layout% -; %name% -; %number% -; Default: %layout% -label-layout = " %layout%" - -; Available tokens: -; %name% -; Default: %name% -label-indicator-on = %name% -label-indicator-on-foreground = ${color.primary} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/title] -type = internal/xwindow - -; Available tags: -; <label> (default) -format = <label> -format-background = ${color.background} -format-padding = 0 -;format-prefix = - -; Available tokens: -; %title% -; Default: %title% -label = "%title%" -label-maxlen = 30 - -; Used instead of label when there is no window title -;;label-empty = Arch Linux - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [module/workspaces] type = internal/xworkspaces - -; Only show workspaces defined on the same output as the bar -; -; Useful if you want to show monitor specific workspaces -; on different bars -; -; Default: false pin-workspaces = true - -; Create click handler used to focus desktop -; Default: true enable-click = true - -; Create scroll handlers used to cycle desktops -; Default: true enable-scroll = true - -; icon-[0-9]+ = <desktop-name>;<icon> -; NOTE: The desktop name needs to match the name configured by the WM -; You can get a list of the defined desktops using: -; $ xprop -root _NET_DESKTOP_NAMES icon-0 = 1;I icon-1 = 2;II icon-2 = 3;III icon-3 = 4;IV icon-4 = 5;V icon-default = VI - - -; Available tags: -; <label-monitor> -; <label-state> - gets replaced with <label-(active|urgent|occupied|empty)> -; Default: <label-state> format = <label-state> format-background = ${color.background} format-padding = 0 - -; Available tokens: -; %name% -; Default: %name% label-monitor = %name% - -; Available tokens: -; %name% -; %icon% -; %index% -; Default: %icon% %name% label-active = %icon% label-active-foreground = ${color.red} label-active-overline = ${color.red} - -; Available tokens: -; %name% -; %icon% -; %index% -; Default: %icon% %name% label-occupied = %icon% label-occupied-foreground = ${color.yellow} - -; Available tokens: -; %name% -; %icon% -; %index% -; Default: %icon% %name% label-urgent = %icon% label-urgent-foreground = ${color.green} - -; Available tokens: -; %name% -; %icon% -; %index% -; Default: %icon% %name% label-empty = %icon% - label-active-padding = 1 label-urgent-padding = 1 label-occupied-padding = 1 label-empty-padding = 1 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/polybar/cuts/preview.ini b/polybar/cuts/preview.ini deleted file mode 100644 index 3377f74..0000000 --- a/polybar/cuts/preview.ini +++ /dev/null @@ -1,323 +0,0 @@ -;; ┌────────────────────────────────────────────────────────────────────┐ -;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀█░█▀▄░█▀▀░█░█░▀█▀░█▀▀░█░█░█▀▀│ -;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▀░█▀▄░█▀▀░▀▄▀░░█░░█▀▀░█▄█░▀▀█│ -;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░░░▀░▀░▀▀▀░░▀░░▀▀▀░▀▀▀░▀░▀░▀▀▀│ -;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ -;; └────────────────────────────────────────────────────────────────────┘ - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Global WM Settings - -[global/wm] -; Adjust the _NET_WM_STRUT_PARTIAL top value -; Used for top aligned bars -margin-bottom = 0 - -; Adjust the _NET_WM_STRUT_PARTIAL bottom value -; Used for bottom aligned bars -margin-top = 0 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; File Inclusion -; include an external file, like module file, etc. - -include-file = ~/.config/polybar/cuts/bars.ini -include-file = ~/.config/polybar/cuts/colors.ini -include-file = ~/.config/polybar/cuts/modules.ini -include-file = ~/.config/polybar/cuts/user_modules.ini - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Bar Settings - -[bar/main] -; Use either of the following command to list available outputs: -; If unspecified, the application will pick the first one it finds. -; $ polybar -m | cut -d ':' -f 1 -; $ xrandr -q | grep " connected" | cut -d ' ' -f1 -monitor = - -; Use the specified monitor as a fallback if the main one is not found. -monitor-fallback = - -; Require the monitor to be in connected state -; XRandR sometimes reports my monitor as being disconnected (when in use) -monitor-strict = false - -; Tell the Window Manager not to configure the window. -; Use this to detach the bar if your WM is locking its size/position. -override-redirect = false - -; Put the bar at the bottom of the screen -bottom = false - -; Prefer fixed center position for the `modules-center` block -; When false, the center position will be based on the size of the other blocks. -fixed-center = true - -; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), -; the percentage can optionally be extended with a pixel offset like so: -; 50%:-10, this will result in a width or height of 50% minus 10 pixels -width = 100% -height = 28 - -; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) -; the percentage can optionally be extended with a pixel offset like so: -; 50%:-10, this will result in an offset in the x or y direction -; of 50% minus 10 pixels -offset-x = 0% -offset-y = 0% - -; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) -background = ${color.background-alt} - -; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) -foreground = ${color.foreground} - -; Background gradient (vertical steps) -; background-[0-9]+ = #aarrggbb -;;background-0 = - -; Value used for drawing rounded corners -; Note: This shouldn't be used together with border-size because the border -; doesn't get rounded -; Individual top/bottom values can be defined using: -; radius-{top,bottom} -radius-top = 0.0 -radius-bottom = 0.0 - -; Under-/overline pixel size and argb color -; Individual values can be defined using: -; {overline,underline}-size -; {overline,underline}-color -line-size = 2 -line-color = ${color.primary} - -; Values applied to all borders -; Individual side values can be defined using: -; border-{left,top,right,bottom}-size -; border-{left,top,right,bottom}-color -; The top and bottom borders are added to the bar height, so the effective -; window height is: -; height + border-top-size + border-bottom-size -; Meanwhile the effective window width is defined entirely by the width key and -; the border is placed withing this area. So you effectively only have the -; following horizontal space on the bar: -; width - border-right-size - border-left-size -border-size = 0 -border-color = ${color.primary} - -; Number of spaces to add at the beginning/end of the bar -; Individual side values can be defined using: -; padding-{left,right} -padding = 0 - -; Number of spaces to add before/after each module -; Individual side values can be defined using: -; module-margin-{left,right} -module-margin-left = 0 -module-margin-right = 0 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; Fonts are defined using <font-name>;<vertical-offset> -; Font names are specified using a fontconfig pattern. -; font-0 = NotoSans-Regular:size=8;2 -; font-1 = MaterialIcons:size=10 -; font-2 = Termsynu:size=8;-1 -; font-3 = FontAwesome:size=10 -; See the Fonts wiki page for more details - -; Text Fonts -font-0 = Iosevka Nerd Font:style=Medium:size=10;4 -; Icons Fonts -font-1 = feather:style=Medium:size=12;3 -; Powerline Glyphs -font-2 = Iosevka Nerd Font:style=Medium:size=19;3 -; Larger font size for bar fill icons -font-3 = Iosevka Nerd Font:style=Medium:size=12;4 -; Smaller font size for shorter spaces -font-4 = Iosevka Nerd Font:style=Medium:size=7;4 - -; Modules are added to one of the available blocks -; modules-left = cpu ram -; modules-center = xwindow xbacklight -; modules-right = ipc clock - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[bar/top] -inherit = bar/main -bottom = true -offset-y = 71 -modules-left = launcher title decor1 decor2 workspaces decor1 decor2 color-switch decor1 -modules-right = decor4 updates decor3 decor4 temperature battery keyboard decor3 decor4 date sysmenu -enable-ipc = true - -[bar/mid] -inherit = bar/main -bottom = true -offset-y = 38 -modules-left = menu decor1 decor2 mpd_bar decor1 decor2 term files browser settings decor1 decor2 cpu_bar decor1 -modules-right = decor4 memory_bar decor3 decor4 alsa backlight decor3 decor4 filesystem_bar decor3 decor4 battery_bar pulseaudio decor3 decor4 powermenu -enable-ipc = true - -[bar/bottom] -inherit = bar/main -bottom = true -offset-y = 5 -modules-left = mpd decor3 decor4 cpu memory filesystem decor3 -modules-right = decor2 network decor1 decor2 volume brightness -enable-ipc = true - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; The separator will be inserted between the output of each module -separator = - -; Opacity value between 0.0 and 1.0 used on fade in/out -dim-value = 1.0 - -; Value to be used to set the WM_NAME atom -; If the value is empty or undefined, the atom value -; will be created from the following template: polybar-[BAR]_[MONITOR] -; NOTE: The placeholders are not available for custom values -wm-name = - -; Locale used to localize various module data (e.g. date) -; Expects a valid libc locale, for example: sv_SE.UTF-8 -locale = - -; Position of the system tray window -; If empty or undefined, tray support will be disabled -; NOTE: A center aligned tray will cover center aligned modules -; -; Available positions: -; left -; center -; right -; none -tray-position = none - -; If true, the bar will not shift its -; contents when the tray changes -tray-detached = false - -; Tray icon max size -tray-maxsize = 16 - -; Background color for the tray container -; ARGB color (e.g. #f00, #ff992a, #ddff1023) -; By default the tray container will use the bar -; background color. -tray-background = ${color.background-alt} - -; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) -tray-offset-x = 0 -tray-offset-y = 0 - -; Pad the sides of each tray icon -tray-padding = 0 - -; Scale factor for tray clients -tray-scale = 1.0 - -; Restack the bar window and put it above the -; selected window manager's root -; -; Fixes the issue where the bar is being drawn -; on top of fullscreen window's -; -; Currently supported WM's: -; bspwm -; i3 (requires: `override-redirect = true`) -;;wm-restack = - -; Set a DPI values used when rendering text -; This only affects scalable fonts -; dpi = - -; Enable support for inter-process messaging -; See the Messaging wiki page for more details. -;enable-ipc = true - -; Fallback click handlers that will be called if -; there's no matching module handler found. -click-left = -click-middle = -click-right = -scroll-up = -scroll-down = -double-click-left = -double-click-middle = -double-click-right = - -; Requires polybar to be built with xcursor support (xcb-util-cursor) -; Possible values are: -; - default : The default pointer as before, can also be an empty string (default) -; - pointer : Typically in the form of a hand -; - ns-resize : Up and down arrows, can be used to indicate scrolling -cursor-click = -cursor-scroll = - -;; WM Workspace Specific - -; bspwm -;;scroll-up = bspwm-desknext -;;scroll-down = bspwm-deskprev -;;scroll-up = bspc desktop -f prev.local -;;scroll-down = bspc desktop -f next.local - -;i3 -;;scroll-up = i3wm-wsnext -;;scroll-down = i3wm-wsprev -;;scroll-up = i3-msg workspace next_on_output -;;scroll-down = i3-msg workspace prev_on_output - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Application Settings - -[settings] -; The throttle settings lets the eventloop swallow up til X events -; if they happen within Y millisecond after first event was received. -; This is done to prevent flood of update event. -; -; For example if 5 modules emit an update event at the same time, we really -; just care about the last one. But if we wait too long for events to swallow -; the bar would appear sluggish so we continue if timeout -; expires or limit is reached. -throttle-output = 5 -throttle-output-for = 10 - -; Time in milliseconds that the input handler will wait between processing events -;throttle-input-for = 30 - -; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events -screenchange-reload = false - -; Compositing operators -; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t -compositing-background = source -compositing-foreground = over -compositing-overline = over -compositing-underline = over -compositing-border = over - -; Define fallback values used by all module formats -;format-foreground = -;format-background = -;format-underline = -;format-overline = -;format-spacing = -;format-padding = -;format-margin = -;format-offset = - -; Enables pseudo-transparency for the bar -; If set to true the bar can be transparent without a compositor. -pseudo-transparency = false - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/polybar/cuts/preview.sh b/polybar/cuts/preview.sh deleted file mode 100755 index 9bb0ae6..0000000 --- a/polybar/cuts/preview.sh +++ /dev/null @@ -1,14 +0,0 @@ -#!/usr/bin/env bash - -DIR="$HOME/.config/polybar/cuts" - -# Terminate already running bar instances -killall -q polybar - -# Wait until the processes have been shut down -while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done - -# Launch the preview bar -polybar -q top -c "$DIR"/preview.ini & -polybar -q mid -c "$DIR"/preview.ini & -polybar -q bottom -c "$DIR"/preview.ini & diff --git a/polybar/cuts/scripts/checkupdates b/polybar/cuts/scripts/checkupdates index 4d8a5e8..ef9b433 100755 --- a/polybar/cuts/scripts/checkupdates +++ b/polybar/cuts/scripts/checkupdates @@ -1,23 +1,4 @@ #!/usr/bin/bash -# -# checkupdates: Safely print a list of pending updates. -# -# Copyright (c) 2013 Kyle Keen <keenerd@gmail.com> -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - declare -r myname='checkupdates' declare -r myver='1.0.0' @@ -113,5 +94,3 @@ fi pacman -Qu --dbpath "$CHECKUPDATES_DB" 2> /dev/null | grep -v '\[.*\]' exit 0 - -# vim: set noet: diff --git a/polybar/cuts/scripts/colors-dark.sh b/polybar/cuts/scripts/colors-dark.sh deleted file mode 100755 index 22f1ca8..0000000 --- a/polybar/cuts/scripts/colors-dark.sh +++ /dev/null @@ -1,102 +0,0 @@ -#!/usr/bin/env bash - -# Color files -PFILE="$HOME/.config/polybar/cuts/colors.ini" -RFILE="$HOME/.config/polybar/cuts/scripts/rofi/colors.rasi" - -BG="0a0a0a" -FG="f5f5f5" - -# Change colors -change_color() { - # polybar - sed -i -e "s/background = #.*/background = #${BG}/g" $PFILE - sed -i -e "s/background-alt = #.*/background-alt = #8C${BG}/g" $PFILE - sed -i -e "s/foreground = #.*/foreground = #${FG}/g" $PFILE - sed -i -e "s/foreground-alt = #.*/foreground-alt = #33${FG}/g" $PFILE - sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE - - # rofi - cat > $RFILE <<- EOF - /* colors */ - - * { - al: #00000000; - bg: #${BG}BF; - bga: #${BG}FF; - fg: #${FG}FF; - ac: ${AC}FF; - se: ${AC}1A; - } - EOF - - polybar-msg cmd restart -} - -if [[ $1 = "--amber" ]]; then - AC="#ffb300" - change_color -elif [[ $1 = "--blue" ]]; then - AC="#1e88e5" - change_color -elif [[ $1 = "--blue-gray" ]]; then - AC="#546e7a" - change_color -elif [[ $1 = "--brown" ]]; then - AC="#6d4c41" - change_color -elif [[ $1 = "--cyan" ]]; then - AC="#00acc1" - change_color -elif [[ $1 = "--deep-orange" ]]; then - AC="#f4511e" - change_color -elif [[ $1 = "--deep-purple" ]]; then - AC="#5e35b1" - change_color -elif [[ $1 = "--green" ]]; then - AC="#43a047" - change_color -elif [[ $1 = "--gray" ]]; then - AC="#757575" - change_color -elif [[ $1 = "--indigo" ]]; then - AC="#3949ab" - change_color -elif [[ $1 = "--light-blue" ]]; then - AC="#039be5" - change_color -elif [[ $1 = "--light-green" ]]; then - AC="#7cb342" - change_color -elif [[ $1 = "--lime" ]]; then - AC="#c0ca33" - change_color -elif [[ $1 = "--orange" ]]; then - AC="#fb8c00" - change_color -elif [[ $1 = "--pink" ]]; then - AC="#d81b60" - change_color -elif [[ $1 = "--purple" ]]; then - AC="#8e24aa" - change_color -elif [[ $1 = "--red" ]]; then - AC="#e53935" - change_color -elif [[ $1 = "--teal" ]]; then - AC="#00897b" - change_color -elif [[ $1 = "--yellow" ]]; then - AC="#fdd835" - change_color -else - cat <<- _EOF_ - No option specified, Available options: - --amber --blue --blue-gray --brown - --cyan --deep-orange --deep-purple --green - --gray --indigo --light-blue --light-green - --lime --orange --pink --purple - --red --teal --yellow - _EOF_ -fi diff --git a/polybar/cuts/scripts/colors-light.sh b/polybar/cuts/scripts/colors-light.sh deleted file mode 100755 index d7151e9..0000000 --- a/polybar/cuts/scripts/colors-light.sh +++ /dev/null @@ -1,102 +0,0 @@ -#!/usr/bin/env bash - -# Color files -PFILE="$HOME/.config/polybar/cuts/colors.ini" -RFILE="$HOME/.config/polybar/cuts/scripts/rofi/colors.rasi" - -BG="FFFFFF" -FG="0A0A0A" - -# Change colors -change_color() { - # polybar - sed -i -e "s/background = #.*/background = #${BG}/g" $PFILE - sed -i -e "s/background-alt = #.*/background-alt = #8C${BG}/g" $PFILE - sed -i -e "s/foreground = #.*/foreground = #${FG}/g" $PFILE - sed -i -e "s/foreground-alt = #.*/foreground-alt = #33${FG}/g" $PFILE - sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE - - # rofi - cat > $RFILE <<- EOF - /* colors */ - - * { - al: #00000000; - bg: #${BG}BF; - bga: #${BG}FF; - fg: #${FG}FF; - ac: ${AC}FF; - se: ${AC}1A; - } - EOF - - polybar-msg cmd restart -} - -if [[ $1 = "--amber" ]]; then - AC="#ffb300" - change_color -elif [[ $1 = "--blue" ]]; then - AC="#1e88e5" - change_color -elif [[ $1 = "--blue-gray" ]]; then - AC="#546e7a" - change_color -elif [[ $1 = "--brown" ]]; then - AC="#6d4c41" - change_color -elif [[ $1 = "--cyan" ]]; then - AC="#00acc1" - change_color -elif [[ $1 = "--deep-orange" ]]; then - AC="#f4511e" - change_color -elif [[ $1 = "--deep-purple" ]]; then - AC="#5e35b1" - change_color -elif [[ $1 = "--green" ]]; then - AC="#43a047" - change_color -elif [[ $1 = "--gray" ]]; then - AC="#757575" - change_color -elif [[ $1 = "--indigo" ]]; then - AC="#3949ab" - change_color -elif [[ $1 = "--light-blue" ]]; then - AC="#039be5" - change_color -elif [[ $1 = "--light-green" ]]; then - AC="#7cb342" - change_color -elif [[ $1 = "--lime" ]]; then - AC="#c0ca33" - change_color -elif [[ $1 = "--orange" ]]; then - AC="#fb8c00" - change_color -elif [[ $1 = "--pink" ]]; then - AC="#d81b60" - change_color -elif [[ $1 = "--purple" ]]; then - AC="#8e24aa" - change_color -elif [[ $1 = "--red" ]]; then - AC="#e53935" - change_color -elif [[ $1 = "--teal" ]]; then - AC="#00897b" - change_color -elif [[ $1 = "--yellow" ]]; then - AC="#fdd835" - change_color -else - cat <<- _EOF_ - No option specified, Available options: - --amber --blue --blue-gray --brown - --cyan --deep-orange --deep-purple --green - --gray --indigo --light-blue --light-green - --lime --orange --pink --purple - --red --teal --yellow - _EOF_ -fi diff --git a/polybar/cuts/scripts/launcher.sh b/polybar/cuts/scripts/launcher.sh deleted file mode 100755 index 0386394..0000000 --- a/polybar/cuts/scripts/launcher.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/usr/bin/env bash - -rofi -no-config -no-lazy-grab -show drun -modi drun -theme ~/.config/polybar/cuts/scripts/rofi/launcher.rasi diff --git a/polybar/cuts/scripts/powermenu.sh b/polybar/cuts/scripts/powermenu.sh deleted file mode 100755 index 7017be5..0000000 --- a/polybar/cuts/scripts/powermenu.sh +++ /dev/null @@ -1,94 +0,0 @@ -#!/usr/bin/env bash - -## Author : Aditya Shakya -## Mail : adi1090x@gmail.com -## Github : @adi1090x -## Twitter : @adi1090x - -dir="~/.config/polybar/cuts/scripts/rofi" -uptime=$(uptime -p | sed -e 's/up //g') - -rofi_command="rofi -theme $dir/powermenu.rasi" - -# Options -shutdown=" Shutdown" -reboot=" Restart" -lock=" Lock" -suspend=" Sleep" -logout=" Logout" - -# Confirmation -confirm_exit() { - rofi -dmenu\ - -i\ - -no-fixed-num-lines\ - -p "Are You Sure? : "\ - -theme $dir/confirm.rasi -} - -# Message -msg() { - rofi -theme "$dir/message.rasi" -e "Available Options - yes / y / no / n" -} - -# Variable passed to rofi -options="$lock\n$suspend\n$logout\n$reboot\n$shutdown" - -chosen="$(echo -e "$options" | $rofi_command -p "Uptime: $uptime" -dmenu -selected-row 0)" -case $chosen in - $shutdown) - ans=$(confirm_exit &) - if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then - systemctl poweroff - elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then - exit 0 - else - msg - fi - ;; - $reboot) - ans=$(confirm_exit &) - if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then - systemctl reboot - elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then - exit 0 - else - msg - fi - ;; - $lock) - if [[ -f /usr/bin/i3lock ]]; then - i3lock - elif [[ -f /usr/bin/betterlockscreen ]]; then - betterlockscreen -l - fi - ;; - $suspend) - ans=$(confirm_exit &) - if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then - mpc -q pause - amixer set Master mute - systemctl suspend - elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then - exit 0 - else - msg - fi - ;; - $logout) - ans=$(confirm_exit &) - if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then - if [[ "$DESKTOP_SESSION" == "Openbox" ]]; then - openbox --exit - elif [[ "$DESKTOP_SESSION" == "bspwm" ]]; then - bspc quit - elif [[ "$DESKTOP_SESSION" == "i3" ]]; then - i3-msg exit - fi - elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then - exit 0 - else - msg - fi - ;; -esac diff --git a/polybar/cuts/scripts/random.sh b/polybar/cuts/scripts/random.sh deleted file mode 100755 index 6addb58..0000000 --- a/polybar/cuts/scripts/random.sh +++ /dev/null @@ -1,91 +0,0 @@ -#!/usr/bin/env bash - -# Color files -PFILE="$HOME/.config/polybar/cuts/colors.ini" -RFILE="$HOME/.config/polybar/cuts/scripts/rofi/colors.rasi" - -# Change colors -change_color() { - # polybar - sed -i -e "s/background = #.*/background = #${BG}/g" $PFILE - sed -i -e "s/background-alt = #.*/background-alt = #8C${BG}/g" $PFILE - sed -i -e "s/foreground = #.*/foreground = #${FG}/g" $PFILE - sed -i -e "s/foreground-alt = #.*/foreground-alt = #33${FG}/g" $PFILE - sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE - - # rofi - cat > $RFILE <<- EOF - /* colors */ - - * { - al: #00000000; - bg: #${BG}BF; - bga: #${BG}FF; - fg: #${FG}FF; - ac: ${AC}FF; - se: ${AC}1A; - } - EOF - - polybar-msg cmd restart -} - -get_random_number() { - RNUM=$(( ($RANDOM % $1) + 1 )) -} - -get_random_color() { - RCOLOR="#" - for i in 1 2 3 4 5 6 - do - get_random_number "16" - case $RNUM in - "1") NEXTDIGIT="1";; - "2") NEXTDIGIT="2";; - "3") NEXTDIGIT="3";; - "4") NEXTDIGIT="4";; - "5") NEXTDIGIT="5";; - "6") NEXTDIGIT="6";; - "7") NEXTDIGIT="7";; - "8") NEXTDIGIT="8";; - "9") NEXTDIGIT="9";; - "10") NEXTDIGIT="A";; - "11") NEXTDIGIT="B";; - "12") NEXTDIGIT="C";; - "13") NEXTDIGIT="D";; - "14") NEXTDIGIT="E";; - "15") NEXTDIGIT="F";; - "16") NEXTDIGIT="0";; - esac - RCOLOR="$RCOLOR$NEXTDIGIT" - done - echo $RCOLOR -} - -hex_to_rgb() { - # Convert a hex value WITHOUT the hashtag (#) - R=$(printf "%d" 0x${1:0:2}) - G=$(printf "%d" 0x${1:2:2}) - B=$(printf "%d" 0x${1:4:2}) -} - -get_fg_color(){ - INTENSITY=$(calc "$R*0.299 + $G*0.587 + $B*0.114") - - if [ $(echo "$INTENSITY>186" | bc) -eq 1 ]; then - FG="0a0a0a" - AC="#0a0a0a" - else - FG="F5F5F5" - AC="#F5F5F5" - fi -} - -# Main -BGC=`get_random_color` -BG=${BGC:1} -HEX=$BG - -hex_to_rgb $HEX -get_fg_color -change_color diff --git a/polybar/cuts/scripts/rofi/colors.rasi b/polybar/cuts/scripts/rofi/colors.rasi deleted file mode 100644 index 9ca84d0..0000000 --- a/polybar/cuts/scripts/rofi/colors.rasi +++ /dev/null @@ -1,10 +0,0 @@ -/* colors */ - -* { - al: #00000000; - bg: #100f0eBF; - bga: #100f0eFF; - fg: #e5e5e8FF; - ac: #717986FF; - se: #7179861A; -} diff --git a/polybar/cuts/scripts/rofi/confirm.rasi b/polybar/cuts/scripts/rofi/confirm.rasi deleted file mode 100644 index bd82b52..0000000 --- a/polybar/cuts/scripts/rofi/confirm.rasi +++ /dev/null @@ -1,25 +0,0 @@ -/* Confirm Dialog */ - -@import "colors.rasi" - -* { - background-color: @bga; - text-color: @fg; - font: "Iosevka Nerd Font 10"; -} - -window { - width: 225px; - padding: 25px; - border: 0px; - border-radius: 0px; - border-color: @ac; - location: center; - y-offset: -2em; -} - -entry { - expand: true; - text-color: @ac; -} - diff --git a/polybar/cuts/scripts/rofi/launcher.rasi b/polybar/cuts/scripts/rofi/launcher.rasi deleted file mode 100644 index f9be5dd..0000000 --- a/polybar/cuts/scripts/rofi/launcher.rasi +++ /dev/null @@ -1,115 +0,0 @@ -/* - * - * Author : Aditya Shakya - * Mail : adi1090x@gmail.com - * Github : @adi1090x - * Twitter : @adi1090x - * - */ - -configuration { - font: "Iosevka Nerd Font 10"; - show-icons: true; - icon-theme: "Papirus"; - display-drun: ""; - drun-display-format: "{name}"; - disable-history: false; - fullscreen: false; - hide-scrollbar: true; - sidebar-mode: false; -} - -@import "colors.rasi" - -window { - transparency: "real"; - background-color: @bg; - text-color: @fg; - border: 0px; - border-color: @ac; - border-radius: 0px; - width: 500px; - location: center; - x-offset: 0; - y-offset: 0; -} - -prompt { - enabled: true; - padding: 0px; - background-color: @al; - text-color: @ac; - font: "feather 12"; -} - -entry { - background-color: @al; - text-color: @fg; - placeholder-color: @fg; - expand: true; - horizontal-align: 0; - placeholder: "Search..."; - padding: 0px 0px 0px 8px; - blink: true; -} - -inputbar { - children: [ prompt, entry ]; - background-color: @bga; - text-color: @fg; - expand: false; - border: 0px 0px 0px 0px; - border-radius: 0px; - border-color: @ac; - margin: 0px; - padding: 12px; -} - -listview { - background-color: @al; - padding: 0px; - columns: 1; - lines: 6; - spacing: 5px; - cycle: true; - dynamic: true; - layout: vertical; -} - -mainbox { - background-color: @al; - border: 0px; - border-radius: 0px; - border-color: @ac; - children: [ inputbar, listview ]; - spacing: 0px; - padding: 0px; -} - -element { - background-color: @al; - text-color: @fg; - orientation: horizontal; - border-radius: 0px; - padding: 8px; -} - -element-icon { - size: 24px; - border: 0px; -} - -element-text { - expand: true; - horizontal-align: 0; - vertical-align: 0.5; - margin: 0px 2.5px 0px 2.5px; -} - -element selected { - background-color: @se; - text-color: @fg; - border: 0px 0px 0px 2px; - border-radius: 0px; - border-color: @ac; -} diff --git a/polybar/cuts/scripts/rofi/message.rasi b/polybar/cuts/scripts/rofi/message.rasi deleted file mode 100644 index 434f16b..0000000 --- a/polybar/cuts/scripts/rofi/message.rasi +++ /dev/null @@ -1,24 +0,0 @@ -/* Confirm Dialog */ - -@import "colors.rasi" - -* { - background-color: @bga; - text-color: @fg; - font: "Iosevka Nerd Font 10"; -} - -window { - width: 320px; - padding: 25px; - border: 0px; - border-radius: 0px; - border-color: @ac; - location: center; - y-offset: -2em; -} - -entry { - expand: true; - text-color: @ac; -} diff --git a/polybar/cuts/scripts/rofi/networkmenu.rasi b/polybar/cuts/scripts/rofi/networkmenu.rasi deleted file mode 100644 index 2ac18b8..0000000 --- a/polybar/cuts/scripts/rofi/networkmenu.rasi +++ /dev/null @@ -1,123 +0,0 @@ -/* - * - * Author : Aditya Shakya - * Mail : adi1090x@gmail.com - * Github : @adi1090x - * Twitter : @adi1090x - * - */ - -configuration { - font: "Iosevka Nerd Font 10"; - show-icons: true; - icon-theme: "Papirus"; - display-drun: ""; - drun-display-format: "{name}"; - disable-history: false; - fullscreen: false; - hide-scrollbar: true; - sidebar-mode: false; -} - -@import "colors.rasi" - -window { - transparency: "real"; - background-color: @bg; - text-color: @fg; - border: 0px; - border-color: @ac; - border-radius: 0px; - width: 400px; - location: center; - x-offset: 0; - y-offset: 0; -} - -prompt { - enabled: true; - padding: 0px 0px 0px 5px; - background-color: @al; - text-color: @fg; -} - -textbox-prompt-colon { - padding: 0px 0px 0px 2px; - background-color: @al; - text-color: @ac; - expand: false; - str: ""; - font: "feather 12"; -} - -entry { - background-color: @al; - text-color: @fg; - placeholder-color: @fg; - expand: true; - horizontal-align: 0; - placeholder: "Search..."; - padding: 0px; - blink: true; -} - -inputbar { - children: [ textbox-prompt-colon, prompt ]; - background-color: @bga; - text-color: @fg; - expand: false; - border: 0px 0px 0px 0px; - border-radius: 0px; - border-color: @ac; - margin: 0px; - padding: 12px; -} - -listview { - background-color: @al; - padding: 0px; - columns: 1; - lines: 8; - spacing: 0px; - cycle: true; - dynamic: true; - layout: vertical; -} - -mainbox { - background-color: @al; - border: 0px; - border-radius: 0px; - border-color: @ac; - children: [ inputbar, listview ]; - spacing: 0px; - padding: 0px; -} - -element { - background-color: @al; - text-color: @fg; - orientation: horizontal; - border-radius: 0px; - padding: 8px 8px 8px -15px; -} - -element-icon { - size: 24px; - border: 0px; -} - -element-text { - expand: true; - horizontal-align: 0; - vertical-align: 0.5; - margin: 0px 2.5px 0px 2.5px; -} - -element selected { - background-color: @se; - text-color: @fg; - border: 0px 0px 0px 2px; - border-radius: 0px; - border-color: @ac; -} diff --git a/polybar/cuts/scripts/rofi/powermenu.rasi b/polybar/cuts/scripts/rofi/powermenu.rasi deleted file mode 100644 index 7c83572..0000000 --- a/polybar/cuts/scripts/rofi/powermenu.rasi +++ /dev/null @@ -1,123 +0,0 @@ -/* - * - * Author : Aditya Shakya - * Mail : adi1090x@gmail.com - * Github : @adi1090x - * Twitter : @adi1090x - * - */ - -configuration { - font: "Iosevka Nerd Font 10"; - show-icons: true; - icon-theme: "Papirus"; - display-drun: ""; - drun-display-format: "{name}"; - disable-history: false; - fullscreen: false; - hide-scrollbar: true; - sidebar-mode: false; -} - -@import "colors.rasi" - -window { - transparency: "real"; - background-color: @bg; - text-color: @fg; - border: 0px; - border-color: @ac; - border-radius: 0px; - width: 300px; - location: center; - x-offset: 0; - y-offset: 0; -} - -prompt { - enabled: true; - padding: 0px 0px 0px 5px; - background-color: @al; - text-color: @fg; -} - -textbox-prompt-colon { - padding: 0px 0px 0px 2px; - background-color: @al; - text-color: @ac; - expand: false; - str: ""; - font: "feather 12"; -} - -entry { - background-color: @al; - text-color: @fg; - placeholder-color: @fg; - expand: true; - horizontal-align: 0; - placeholder: "Search..."; - padding: 0px; - blink: true; -} - -inputbar { - children: [ textbox-prompt-colon, prompt ]; - background-color: @bga; - text-color: @fg; - expand: false; - border: 0px 0px 0px 0px; - border-radius: 0px; - border-color: @ac; - margin: 0px; - padding: 12px; -} - -listview { - background-color: @al; - padding: 0px; - columns: 1; - lines: 5; - spacing: 0px; - cycle: true; - dynamic: true; - layout: vertical; -} - -mainbox { - background-color: @al; - border: 0px; - border-radius: 0px; - border-color: @ac; - children: [ inputbar, listview ]; - spacing: 0px; - padding: 0px; -} - -element { - background-color: @al; - text-color: @fg; - orientation: horizontal; - border-radius: 0px; - padding: 8px 8px 8px -15px; -} - -element-icon { - size: 24px; - border: 0px; -} - -element-text { - expand: true; - horizontal-align: 0; - vertical-align: 0.5; - margin: 0px 2.5px 0px 2.5px; -} - -element selected { - background-color: @se; - text-color: @fg; - border: 0px 0px 0px 2px; - border-radius: 0px; - border-color: @ac; -} diff --git a/polybar/cuts/scripts/rofi/styles.rasi b/polybar/cuts/scripts/rofi/styles.rasi deleted file mode 100644 index 6d3b7f2..0000000 --- a/polybar/cuts/scripts/rofi/styles.rasi +++ /dev/null @@ -1,123 +0,0 @@ -/* - * - * Author : Aditya Shakya - * Mail : adi1090x@gmail.com - * Github : @adi1090x - * Twitter : @adi1090x - * - */ - -configuration { - font: "Iosevka Nerd Font 10"; - show-icons: true; - icon-theme: "Papirus"; - display-drun: ""; - drun-display-format: "{name}"; - disable-history: false; - fullscreen: false; - hide-scrollbar: true; - sidebar-mode: false; -} - -@import "colors.rasi" - -window { - transparency: "real"; - background-color: @bg; - text-color: @fg; - border: 0px; - border-color: @ac; - border-radius: 0px; - width: 300px; - location: center; - x-offset: 0; - y-offset: 0; -} - -prompt { - enabled: true; - padding: 0px 0px 0px 5px; - background-color: @al; - text-color: @fg; -} - -textbox-prompt-colon { - padding: 0px 0px 0px 2px; - background-color: @al; - text-color: @ac; - expand: false; - str: ""; - font: "feather 12"; -} - -entry { - background-color: @al; - text-color: @fg; - placeholder-color: @fg; - expand: true; - horizontal-align: 0; - placeholder: "Search..."; - padding: 0px 0px 0px 5px; - blink: true; -} - -inputbar { - children: [ textbox-prompt-colon, entry ]; - background-color: @bga; - text-color: @fg; - expand: false; - border: 0px 0px 0px 0px; - border-radius: 0px; - border-color: @ac; - margin: 0px; - padding: 12px; -} - -listview { - background-color: @al; - padding: 0px; - columns: 1; - lines: 5; - spacing: 0px; - cycle: true; - dynamic: true; - layout: vertical; -} - -mainbox { - background-color: @al; - border: 0px; - border-radius: 0px; - border-color: @ac; - children: [ inputbar, listview ]; - spacing: 0px; - padding: 0px; -} - -element { - background-color: @al; - text-color: @fg; - orientation: horizontal; - border-radius: 0px; - padding: 8px 8px 8px -15px; -} - -element-icon { - size: 24px; - border: 0px; -} - -element-text { - expand: true; - horizontal-align: 0; - vertical-align: 0.5; - margin: 0px 2.5px 0px 2.5px; -} - -element selected { - background-color: @se; - text-color: @fg; - border: 0px 0px 0px 2px; - border-radius: 0px; - border-color: @ac; -} diff --git a/polybar/cuts/scripts/style-switch.sh b/polybar/cuts/scripts/style-switch.sh deleted file mode 100755 index e693e53..0000000 --- a/polybar/cuts/scripts/style-switch.sh +++ /dev/null @@ -1,20 +0,0 @@ -#!/usr/bin/env bash - -SDIR="$HOME/.config/polybar/cuts/scripts" - -# Launch Rofi -MENU="$(rofi -no-config -no-lazy-grab -sep "|" -dmenu -i -p '' \ --theme $SDIR/rofi/styles.rasi \ -<<< " Black| Adapta| Dark| Red| Green| Teal| Gruvbox| Nord| Solarized| Cherry|")" - case "$MENU" in - *Black) "$SDIR"/styles.sh --mode1 ;; - *Adapta) "$SDIR"/styles.sh --mode2 ;; - *Dark) "$SDIR"/styles.sh --mode3 ;; - *Red) "$SDIR"/styles.sh --mode4 ;; - *Green) "$SDIR"/styles.sh --mode5 ;; - *Teal) "$SDIR"/styles.sh --mode6 ;; - *Gruvbox) "$SDIR"/styles.sh --mode7 ;; - *Nord) "$SDIR"/styles.sh --mode8 ;; - *Solarized) "$SDIR"/styles.sh --mode9 ;; - *Cherry) "$SDIR"/styles.sh --mode10 ;; - esac diff --git a/polybar/cuts/scripts/styles.sh b/polybar/cuts/scripts/styles.sh deleted file mode 100755 index 94b6739..0000000 --- a/polybar/cuts/scripts/styles.sh +++ /dev/null @@ -1,89 +0,0 @@ -#!/usr/bin/env bash - -# Color files -PFILE="$HOME/.config/polybar/cuts/colors.ini" -RFILE="$HOME/.config/polybar/cuts/scripts/rofi/colors.rasi" - -# Change colors -change_color() { - # polybar - sed -i -e "s/background = #.*/background = #${BG}/g" $PFILE - sed -i -e "s/background-alt = #.*/background-alt = #8C${BG}/g" $PFILE - sed -i -e "s/foreground = #.*/foreground = #${FG}/g" $PFILE - sed -i -e "s/foreground-alt = #.*/foreground-alt = #33${FG}/g" $PFILE - sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE - - # rofi - cat > $RFILE <<- EOF - /* colors */ - - * { - al: #00000000; - bg: #${BG}BF; - bga: #${BG}FF; - fg: #${FG}FF; - ac: ${AC}FF; - se: ${AC}1A; - } - EOF - - polybar-msg cmd restart -} - -if [[ $1 = "--mode1" ]]; then - BG="0a0a0a" - FG="f5f5f5" - AC="#fdd835" - change_color -elif [[ $1 = "--mode2" ]]; then - BG="263238" - FG="DFDFDF" - AC="#00BCD4" - change_color -elif [[ $1 = "--mode3" ]]; then - BG="112526" - FG="C4AAA5" - AC="#EE7313" - change_color -elif [[ $1 = "--mode4" ]]; then - BG="461320" - FG="f5f5f5" - AC="#fdd835" - change_color -elif [[ $1 = "--mode5" ]]; then - BG="092F1C" - FG="f5f5f5" - AC="#fdd835" - change_color -elif [[ $1 = "--mode6" ]]; then - BG="003C3C" - FG="CFCFCF" - AC="#00acc1" - change_color -elif [[ $1 = "--mode7" ]]; then - BG="3C3836" - FG="EBDBB2" - AC="#FB4934" - change_color -elif [[ $1 = "--mode8" ]]; then - BG="2E3440" - FG="D8DEE9" - AC="#BF616A" - change_color -elif [[ $1 = "--mode9" ]]; then - BG="002b36" - FG="839496" - AC="#b58900" - change_color -elif [[ $1 = "--mode10" ]]; then - BG="1F1626" - FG="FFFFFF" - AC="#FFD16F" - change_color -else - cat <<- _EOF_ - No option specified, Available options: - --mode1 --mode2 --mode3 --mode4 --mode5 - --mode6 --mode7 --mode8 --mode9 --mode10 - _EOF_ -fi diff --git a/polybar/cuts/user_modules.ini b/polybar/cuts/user_modules.ini index a1a250c..6a165bf 100644 --- a/polybar/cuts/user_modules.ini +++ b/polybar/cuts/user_modules.ini @@ -1,237 +1,15 @@ [module/updates] type = custom/script - -; Available tokens: -; %counter% -; Command to be executed (using "/usr/bin/env sh -c [command]") exec = ~/.config/polybar/cuts/scripts/updates.sh - -; Conditional command that, if defined, needs to exit successfully -; before the main exec command is invoked. -; Default: "" -;;exec-if = "" - -; Will the script output continous content? -; Default: false tail = true - -; Seconds to sleep between updates -; Default: 2 (0 if `tail = true`) interval = 5 - -; Available tags: -; <output> - deprecated -; <label> (default) format = <label> format-prefix = format-background = ${color.background} format-padding = 1 - -; Available tokens: -; %output% -; Default: %output% label = %output% - -; Available tokens: -; %counter% -; %pid% -; -; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c [command]" click-left = exo-open --launch TerminalEmulator & click-right = exo-open --launch TerminalEmulator & -;;double-click-left = echo double left %counter% -;;double-click-middle = echo double middle %counter% -;;double-click-right = echo double right %counter% - -; Available tokens: -; %counter% -; %pid% -; -; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c [command]" -;;scroll-up = echo scroll up %counter% -;;scroll-down = echo scroll down %counter% - - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/launcher] -type = custom/text -content = - -; "content" has the same properties as "format-NAME" -content-background = ${color.background} -content-foreground = ${color.primary} -content-padding = 1 - -; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND" -click-left = ~/.config/polybar/cuts/scripts/launcher.sh & -;;click-middle = ~/.config/polybar/cuts/scripts/launcher-full -click-right = ~/.config/polybar/cuts/scripts/color-switch.sh & - -; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND" -;;scroll-up = ~/.config/polybar/cuts/scripts/launcher.sh & -;;scroll-down = ~/.config/polybar/cuts/scripts/color-switch.sh & - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/sysmenu] -type = custom/text -content = - -content-background = ${color.background} -content-foreground = ${color.primary} -content-padding = 1 - -click-left = ~/.config/polybar/cuts/scripts/powermenu.sh & - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/color-switch] -type = custom/text -content = - -content-background = ${color.background} -content-foreground = ${color.foreground} -content-padding = 1 - -click-left = ~/.config/polybar/cuts/scripts/style-switch.sh & -click-right = ~/.config/polybar/cuts/scripts/color-switch.sh & - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/apps] -type = custom/text -content-background = ${color.background} -content-padding = 1 - -[module/term] -inherit = module/apps -content = -content-foreground = #fdd835 -click-left = termite & -click-middle = urxvt & -click-right = xfce4-terminal & - -[module/files] -inherit = module/apps -content-foreground = #1e88e5 -content = -click-left = thunar & -click-right = pcmanfm & - -[module/browser] -inherit = module/apps -content-foreground = #fb8c00 -content = -click-left = firefox & -click-right = chromium & - -[module/settings] -inherit = module/apps -content-foreground = #00897b -content = -click-left = xfce4-settings-manager & -click-right = lxappearance & - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/powermenu] -type = custom/menu - -; If true, <label-toggle> will be to the left of the menu items (default). -; If false, it will be on the right of all the items. -expand-right = true - -; "menu-LEVEL-N" has the same properties as "label-NAME" with -; the additional "exec" property -; -; Available exec commands: -; menu-open-LEVEL -; menu-close -; Other commands will be executed using "/usr/bin/env sh -c $COMMAND" -menu-0-0 = reboot -menu-0-0-exec = menu-open-1 -menu-0-1 = shutdown -menu-0-1-exec = menu-open-2 - -menu-1-0 = back -menu-1-0-exec = menu-open-0 -menu-1-1 = reboot -menu-1-1-exec = systemctl reboot - -menu-2-0 = shutdown -menu-2-0-exec = systemctl poweroff -menu-2-1 = back -menu-2-1-exec = menu-open-0 - -; Available tags: -; <label-toggle> (default) - gets replaced with <label-(open|close)> -; <menu> (default) -; Note that if you use <label-toggle> you must also include -; the definition for <label-open> - -format = <label-toggle> <menu> -format-background = ${color.background} -format-padding = 1 - -label-open = -label-close = - -; Optional item separator -; Default: none -label-separator = " | " - -label-open-foreground = ${color.primary} -label-close-foreground = ${color.primary} -;;label-separator-foreground = ${color.background} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/menu] -type = custom/menu - -; If true, <label-toggle> will be to the left of the menu items (default). -; If false, it will be on the right of all the items. -expand-right = true - -; "menu-LEVEL-N" has the same properties as "label-NAME" with -; the additional "exec" property -; -; Available exec commands: -; menu-open-LEVEL -; menu-close -; Other commands will be executed using "/usr/bin/env sh -c $COMMAND" -menu-0-0 = Menu -menu-0-0-exec = ~/.config/polybar/cuts/scripts/launcher.sh & -menu-0-1 = Files -menu-0-1-exec = thunar & -menu-0-2 = Terminal -menu-0-2-exec = termite & -menu-0-3 = Browser -menu-0-3-exec = firefox & - -; Available tags: -; <label-toggle> (default) - gets replaced with <label-(open|close)> -; <menu> (default) -; Note that if you use <label-toggle> you must also include -; the definition for <label-open> - -format = <label-toggle> <menu> -format-background = ${color.background} -format-padding = 1 - -label-open = -label-close = - -; Optional item separator -; Default: none -label-separator = " | " - -label-open-foreground = ${color.primary} -label-close-foreground = ${color.primary} -;;label-separator-foreground = ${color.background} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ [module/decor-glyph] type = custom/text @@ -253,6 +31,3 @@ content = "%{T3}%{T-}" [module/decor4] inherit = module/decor-glyph content = "%{T3}%{T-}" - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - diff --git a/polybar/launch.sh b/polybar/launch.sh deleted file mode 100755 index f6d8fb0..0000000 --- a/polybar/launch.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/usr/bin/env bash - -dir="$HOME/.config/polybar" - -# Terminate already running bar instances -killall -q polybar - -# Wait until the processes have been shut down -while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done - -# Launch the bar -polybar -q top -c "$dir/cuts/config.ini" & |