diff options
Diffstat (limited to 'polybar/cuts/bars.ini')
| -rw-r--r-- | polybar/cuts/bars.ini | 470 |
1 files changed, 0 insertions, 470 deletions
diff --git a/polybar/cuts/bars.ini b/polybar/cuts/bars.ini index 43edc3a..0440c08 100644 --- a/polybar/cuts/bars.ini +++ b/polybar/cuts/bars.ini @@ -1,12 +1,3 @@ -;; ┌────────────────────────────────────────────────────┐ -;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▄░█▀█░█▀▄░█▀▀│ -;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▄░█▀█░█▀▄░▀▀█│ -;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀░░▀░▀░▀░▀░▀▀▀│ -;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░│ -;; └────────────────────────────────────────────────────┘ - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [bar] fill = ﭳ empty = ﭳ @@ -14,495 +5,44 @@ indicator = width = 6 format = %{T4}%fill%%indicator%%empty%%{F-}%{T-} -[module/volume] -type = internal/alsa - -; Soundcard to be used -; Usually in the format hw:# where # is the card number -; You can find the different card numbers in `/proc/asound/cards` -master-soundcard = default -speaker-soundcard = default -headphone-soundcard = default - -; Name of the master, speaker and headphone mixers -; Use the following command to list available mixer controls: -; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p" -; If master, speaker or headphone-soundcard isn't the default, -; use `amixer -c # scontrols` instead where # is the number -; of the master, speaker or headphone soundcard respectively -; -; Default: Master -master-mixer = Master - -; Optionally define speaker and headphone mixers -; Default: none -;;speaker-mixer = Speaker -; Default: none -;;headphone-mixer = Headphone - -; NOTE: This is required if headphone_mixer is defined -; Use the following command to list available device controls -; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort -; You may also need to use `amixer -c # controls` as above for the mixer names -; Default: none -;;headphone-id = 9 - -; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear -; Default: false -;;mapped = true - -; Interval for volume increase/decrease (in percent points) -; Default: 5 -interval = 5 - -; Available tags: -; <label-volume> (default) -; <ramp-volume> -; <bar-volume> -format-volume = <ramp-volume> <bar-volume> -format-volume-background = ${color.background} -format-volume-padding = 1 - -; Available tags: -; <label-muted> (default) -; <ramp-volume> -; <bar-volume> -format-muted = <label-muted> -format-muted-prefix = -format-muted-background = ${color.background} -format-muted-padding = 1 - -; Available tokens: -; %percentage% (default) -label-volume = %percentage%% - -; Available tokens: -; %percentage% (default -label-muted = " Muted" -label-muted-foreground = ${color.foreground} - -; Only applies if <ramp-volume> is used -ramp-volume-0 = -ramp-volume-1 = -ramp-volume-2 = - -; Only applies if <bar-volume> is used -bar-volume-format = ${bar.format} -bar-volume-width = ${bar.width} -bar-volume-gradient = false - -bar-volume-indicator = ${bar.indicator} -bar-volume-indicator-foreground = ${color.foreground} - -bar-volume-fill = ${bar.fill} -bar-volume-foreground-0 = ${color.green} -bar-volume-foreground-1 = ${color.green} -bar-volume-foreground-2 = ${color.yellow} -bar-volume-foreground-3 = ${color.yellow} -bar-volume-foreground-4 = ${color.red} - -bar-volume-empty = ${bar.empty} -bar-volume-empty-foreground = ${color.foreground-alt} - -; If defined, it will replace <ramp-volume> when -; headphones are plugged in to `headphone_control_numid` -; If undefined, <ramp-volume> will be used for both -; Only applies if <ramp-volume> is used -ramp-headphones-0 = - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/brightness] -;type = internal/xbacklight -type = internal/backlight - -; Use the following command to list available cards: -; $ ls -1 /sys/class/backlight/ -;card = intel_backlight -card = amdgpu_bl0 - -; Available tags: -; <label> (default) -; <ramp> -; <bar> -format = <ramp> <bar> -format-background = ${color.background} -format-padding = 1 - -; Available tokens: -; %percentage% (default) -label = %percentage%% - -; Only applies if <ramp> is used -ramp-0 = -ramp-1 = -ramp-2 = -ramp-3 = -ramp-4 = - -; Only applies if <bar> is used -bar-format = ${bar.format} -bar-width = ${bar.width} -bar-gradient = false - -bar-indicator = ${bar.indicator} -bar-indicator-foreground = ${color.foreground} - -bar-fill = ${bar.fill} -bar-foreground-0 = ${color.green} -bar-foreground-1 = ${color.green} -bar-foreground-2 = ${color.yellow} -bar-foreground-3 = ${color.yellow} -bar-foreground-4 = ${color.red} - -bar-empty = ${bar.empty} -bar-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/battery_bar] -type = internal/battery - -; This is useful in case the battery never reports 100% charge -full-at = 99 - -; Use the following command to list batteries and adapters: -; $ ls -1 /sys/class/power_supply/ -battery = BAT1 -adapter = ACAD - -; If an inotify event haven't been reported in this many -; seconds, manually poll for new values. -; -; Needed as a fallback for systems that don't report events -; on sysfs/procfs. -; -; Disable polling by setting the interval to 0. -; -; Default: 5 -poll-interval = 2 - -; see "man date" for details on how to format the time string -; NOTE: if you want to use syntax tags here you need to use %%{...} -; Default: %H:%M:%S -time-format = %H:%M - -; Available tags: -; <label-charging> (default) -; <bar-capacity> -; <ramp-capacity> -; <animation-charging> -format-charging = <bar-capacity> -format-charging-prefix = " " -format-charging-background = ${color.background} -format-charging-padding = 1 - -; Available tags: -; <label-discharging> (default) -; <bar-capacity> -; <ramp-capacity> -; <animation-discharging> -format-discharging = <bar-capacity> -format-discharging-prefix = " " -format-discharging-background = ${color.background} -format-discharging-padding = 1 - -; Available tags: -; <label-full> (default) -; <bar-capacity> -; <ramp-capacity> -format-full = <label-full> -format-full-prefix = " " -format-full-background = ${color.background} -format-full-padding = 1 - -; Available tokens: -; %percentage% (default) -; %time% -; %consumption% (shows current charge rate in watts) - -label-charging = %percentage%% - -; Available tokens: -; %percentage% (default) -; %time% -; %consumption% (shows current discharge rate in watts) -label-discharging = %percentage%% - -; Available tokens: -; %percentage% (default) -label-full = " Full" - -; Only applies if <bar-capacity> is used -bar-capacity-format = ${bar.format} -bar-capacity-width = ${bar.width} -bar-capacity-gradient = false - -bar-capacity-indicator = ${bar.indicator} -bar-capacity-indicator-foreground = ${color.foreground} - -bar-capacity-fill = ${bar.fill} -bar-capacity-foreground-0 = ${color.green} -bar-capacity-foreground-1 = ${color.green} -bar-capacity-foreground-2 = ${color.yellow} -bar-capacity-foreground-3 = ${color.yellow} -bar-capacity-foreground-4 = ${color.red} - -bar-capacity-empty = ${bar.empty} -bar-capacity-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/cpu_bar] -type = internal/cpu - -; Seconds to sleep between updates -; Default: 1 -interval = 0.5 - -; Available tags: -; <label> (default) -; <bar-load> -; <ramp-load> -; <ramp-coreload> -;;format = <label> <ramp-coreload> -format = <bar-load> <label> -format-prefix = " " -format-background = ${color.background} -format-padding = 1 - -; Available tokens: -; %percentage% (default) - total cpu load averaged over all cores -; %percentage-sum% - Cumulative load on all cores -; %percentage-cores% - load percentage for each core -; %percentage-core[1-9]% - load percentage for specific core -label = "%percentage%%" - -; Only applies if <bar-load> is used -bar-load-format = ${bar.format} -bar-load-width = ${bar.width} -bar-load-gradient = false - -bar-load-indicator = ${bar.indicator} -bar-load-indicator-foreground = ${color.foreground} - -bar-load-fill = ${bar.fill} -bar-load-foreground-0 = ${color.green} -bar-load-foreground-1 = ${color.green} -bar-load-foreground-2 = ${color.yellow} -bar-load-foreground-3 = ${color.yellow} -bar-load-foreground-4 = ${color.red} - -bar-load-empty = ${bar.empty} -bar-load-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/filesystem_bar] -type = internal/fs - -; Mountpoints to display -mount-0 = / -;;mount-1 = /home -;;mount-2 = /var - -; Seconds to sleep between updates -; Default: 30 -interval = 30 - -; Display fixed precision values -; Default: false -fixed-values = false - -; Spacing between entries -; Default: 2 -;;spacing = 4 - -; Available tags: -; <label-mounted> (default) -; <bar-free> -; <bar-used> -; <ramp-capacity> -format-mounted = <bar-used> <label-mounted> -format-mounted-prefix = " " -format-mounted-background = ${color.background} -format-mounted-padding = 1 - -; Available tags: -; <label-unmounted> (default) -format-unmounted = <label-unmounted> -format-unmounted-prefix = " " -format-unmounted-background = ${color.background} -format-unmounted-padding = 1 - -; Available tokens: -; %mountpoint% -; %type% -; %fsname% -; %percentage_free% -; %percentage_used% -; %total% -; %free% -; %used% -; Default: %mountpoint% %percentage_free%% -label-mounted = %used%/%total% - -; Available tokens: -; %mountpoint% -; Default: %mountpoint% is not mounted -label-unmounted = "%mountpoint%: not mounted" - -; Only applies if <bar-used> is used -bar-used-format = ${bar.format} -bar-used-width = ${bar.width} -bar-used-gradient = false - -bar-used-indicator = ${bar.indicator} -bar-used-indicator-foreground = ${color.foreground} - -bar-used-fill = ${bar.fill} -bar-used-foreground-0 = ${color.green} -bar-used-foreground-1 = ${color.green} -bar-used-foreground-2 = ${color.yellow} -bar-used-foreground-3 = ${color.yellow} -bar-used-foreground-4 = ${color.red} - -bar-used-empty = ${bar.empty} -bar-used-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [module/memory_bar] type = internal/memory - -; Seconds to sleep between updates -; Default: 1 interval = 2 - -; Available tags: -; <label> (default) -; <bar-used> -; <bar-free> -; <ramp-used> -; <ramp-free> -; <bar-swap-used> -; <bar-swap-free> -; <ramp-swap-used> -; <ramp-swap-free> format = <bar-used> <label> format-prefix = " " format-background = ${color.background} format-padding = 1 - -; Available tokens: -; %percentage_used% (default) -; %percentage_free% -; %gb_used% -; %gb_free% -; %gb_total% -; %mb_used% -; %mb_free% -; %mb_total% -; %percentage_swap_used% -; %percentage_swap_free% -; %mb_swap_total% -; %mb_swap_free% -; %mb_swap_used% -; %gb_swap_total% -; %gb_swap_free% -; %gb_swap_used% - label = "%mb_used%" - -; Only applies if <bar-used> is used bar-used-format = ${bar.format} bar-used-width = ${bar.width} bar-used-gradient = false - bar-used-indicator = ${bar.indicator} bar-used-indicator-foreground = ${color.foreground} - bar-used-fill = ${bar.fill} bar-used-foreground-0 = ${color.green} bar-used-foreground-1 = ${color.green} bar-used-foreground-2 = ${color.yellow} bar-used-foreground-3 = ${color.yellow} bar-used-foreground-4 = ${color.red} - bar-used-empty = ${bar.empty} bar-used-empty-foreground = ${color.foreground-alt} -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - [module/mpd_bar] type = internal/mpd - -; Host where mpd is running (either ip or domain name) -; Can also be the full path to a unix socket where mpd is running. -;;host = 127.0.0.1 -;;port = 6600 -;;password = mysecretpassword - -; Seconds to sleep between progressbar/song timer sync -; Default: 1 interval = 1 - -; Available tags: -; <label-song> (default) -; <label-time> -; <bar-progress> -; <toggle> - gets replaced with <icon-(pause|play)> -; <toggle-stop> - gets replaced with <icon-(stop|play)> -; <icon-random> -; <icon-repeat> -; <icon-repeatone> (deprecated) -; <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone> -; <icon-consume> -; <icon-prev> -; <icon-stop> -; <icon-play> -; <icon-pause> -; <icon-next> -; <icon-seekb> -; <icon-seekf> format-online = <label-song> <bar-progress> <label-time> format-online-prefix = format-online-background = ${color.background} format-online-padding = 1 - -;format-playing = ${self.format-online} -;format-paused = ${self.format-online} -;format-stopped = ${self.format-online} - -; Available tags: -; <label-offline> format-offline = <label-offline> format-offline-prefix = format-offline-background = ${color.background} format-offline-padding = 1 - -; Available tokens: -; %artist% -; %album-artist% -; %album% -; %date% -; %title% -; Default: %artist% - %title% label-song = " %artist% - %title%" label-song-maxlen = 25 label-song-ellipsis = true - -; Available tokens: -; %elapsed% -; %total% -; Default: %elapsed% / %total% label-time = %elapsed% / %total% - -; Available tokens: -; None label-offline = " Offline" - -; Only applies if <icon-X> is used icon-play = icon-pause = icon-stop = @@ -515,28 +55,18 @@ icon-repeat = icon-repeatone = icon-single = icon-consume = - -; Used to display the state of random/repeat/repeatone/single -; Only applies if <icon-[random|repeat|repeatone|single]> is used toggle-on-foreground = ${color.green} toggle-off-foreground = ${color.red} - -; Only applies if <bar-progress> is used bar-progress-format = ${bar.format} bar-progress-width = ${bar.width} bar-progress-gradient = false - bar-progress-indicator = ${bar.indicator} bar-progress-indicator-foreground = ${color.foreground} - bar-progress-fill = ${bar.fill} bar-progress-foreground-0 = ${color.green} bar-progress-foreground-1 = ${color.green} bar-progress-foreground-2 = ${color.yellow} bar-progress-foreground-3 = ${color.yellow} bar-progress-foreground-4 = ${color.red} - bar-progress-empty = ${bar.empty} bar-progress-empty-foreground = ${color.foreground-alt} - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ |